3176C and 3196 Engines For Caterpillar Built Machines Caterpillar


Crankshaft Rear Seal Carrier - Remove and Install

Usage:

140H 126

拆卸步骤

表 1
所需工具 
工具  零件号  零件描述  数量 
5F-4764  撬杆 

开始:

  1. 拆下飞轮壳体。 请参阅拆解和组装 , "飞轮壳体 - 拆卸和安装 "。


    图 1g01021163

  1. 拆下螺母 (1)。 拆除将曲轴后密封托架 ( 3) 固定在缸体上的垫圈和螺栓 ( 2)。

  2. 用工具 (A) 小心地将曲轴后密封托架 ( 3) 从曲轴上撬离。

  3. 拆除缸体和曲轴后密封托架 ( 3) 之间的密封垫。

安装步骤



    图 2g01028714

  1. 将新密封垫放在定位销 ( 4) 上。


    图 3g01021163

  2. 将曲轴后密封托架 ( 3) 安置在曲轴上。

  3. 安装螺母 (1)。 安装垫圈和螺栓 (2)。

结束:

  1. 安装飞轮壳体。 请参阅拆解和组装 , "飞轮壳体 - 拆卸和安装"。

Caterpillar Information System:

3500 Spark Ignited Engines Piston and Rings
3176C and 3196 Engines For Caterpillar Built Machines Turbocharger - Install
3176C and 3196 Engines For Caterpillar Built Machines Turbocharger - Remove
3114, 3116 and 3126 MUI Engine Governors Governor (Type I) - Disassemble
3114, 3116 and 3126 MUI Engine Governors Fuel Transfer Pump
3176C and 3196 Engines For Caterpillar Built Machines Camshaft Position Sensor - Remove and Install
3114, 3116 and 3126 MUI Engine Governors Dual Horsepower (Type VII)
3176C and 3196 Industrial Engines Compression Brake - Remove
3406C (PEEC III) Truck Engines Basic Block
3114, 3116 and 3126 MUI Engine Governors Dual Horsepower (Type VI)
3114, 3116 and 3126 MUI Engine Governors Governor Bumper Spring (Some Type IV)
3114, 3116 and 3126 MUI Engine Governors Governor Bias Spring (Most Types IV, V, and VI)
3176C and 3196 Engines For Caterpillar Built Machines Accessory Drive - Disassemble
3406C (PEEC III) Truck Engines Cooling System
3176C and 3196 Engines For Caterpillar Built Machines Accessory Drive - Assemble
3176C and 3196 Engines For Caterpillar Built Machines Camshaft Gear - Remove and Install
3176C and 3196 Engines For Caterpillar Built Machines Crankshaft Gear - Remove and Install
3176C and 3196 Industrial Engines Electronic Control Module - Remove and Install
3500 Spark Ignited Engines Valve Mechanism
3406E On-Highway Engine Engine Oil Filter Base - Assemble
3176C and 3196 Engines For Caterpillar Built Machines Crankshaft Position Sensor - Remove and Install
3176C and 3196 Industrial Engines Compression Brake - Install
G3500B Engines Cylinder Head Valves
3406E On-Highway Engine Engine Oil Pump - Assemble
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.