Rollover Protective Structure (ROPS, Open Cab) - Remove and Install
Removal Procedure
Start By:
- Remove the sweeps.
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Description     | Qty     |
A     | 138-7573     | Link Bracket     | 1     |
- Remove bolt (5) and brace (1) .
Show/hide table
Illustration 1 | g00633698 |
- Remove screens (1), (2), and (3) .
- Disconnect wire harness (6) .
Show/hide table
Illustration 2 | g00633700 |
- Remove bolts (7) from the bottom of the rear screen. Remove bolts (9) from the top of the rear screen. Remove rear screen (8) .
Show/hide table
Illustration 3 | g00633701 |
- The approximate weight of the ROPS is 395 kg (870 lb). Attach Tool (A) and a suitable lifting device to the ROPS. Remove bolts (11) and ROPS (10) .
Installation Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Description     | Qty     |
A     | 138-7573     | Link Bracket     | 1     |
- The approximate weight of the ROPS is 395 kg (870 lb). Use Tool (A) and a suitable lifting device to put ROPS (10) in position for installation. Install bolts (11) .
Show/hide table
Illustration 4 | g00633701 |
- Put rear screen (8) in position. Install bolts (9) in the top of the rear screen. Install bolts (7) in the bottom of the rear screen.
- Connect wire harness (6) .
Show/hide table
Illustration 5 | g00633700 |
- Install screens (1), (2), and (3) .
Show/hide table
Illustration 6 | g00633698 |
- Use bolt (5) to install brace (4) .
End By: Install the sweeps.
Caterpillar Information System:
527 Track-Type Skidder Machine Supplements Sweeps - Remove and Install
527 Track-Type Skidder Machine Supplements Receiver-Dryer - Remove and Install
527 Track-Type Skidder Machine Supplements Refrigerant Evaporator Coil and Heater Core - Install
527 Track-Type Skidder Machine Supplements Refrigerant Evaporator Coil and Heater Core - Remove
527 Track-Type Skidder Machine Supplements Refrigerant Condenser Fans and Motor - Remove and Install
527 Track-Type Skidder Machine Supplements Refrigerant Condenser - Remove and Install
527 Track-Type Skidder Machine Supplements Refrigerant Compressor - Remove and Install
216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders Wheel Nuts - Tighten
527 Track-Type Skidder Machine Supplements Governor Control Linkage - Adjust
527 Track-Type Skidder Machine Supplements Governor Control Linkage and Decelerator - Assemble
824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Hydraulic System Piston Motor (Fan Drive)
793C Off-Highway Truck/Tractor Power Train Lockup Clutch and Synchronizing Valve - Assemble
527 Track-Type Skidder Machine Supplements Rollover Protective Structure (ROPS, Enclosed Cab) - Remove and Install
527 Track-Type Skidder Machine Supplements Cab - Remove
527 Track-Type Skidder Machine Supplements Cab - Install
527 Track-Type Skidder Machine Supplements Seat - Remove and Install
527 Track-Type Skidder Machine Supplements Bulldozer Blade (Power Angle and Tilt) - Remove and Install
527 Track-Type Skidder Machine Supplements Bulldozer Blade (Power Angle) - Remove and Install
527 Track-Type Skidder Machine Supplements Bulldozer Singletree - Remove and Install
527 Track-Type Skidder Machine Supplements Bulldozer C-Frame - Remove
527 Track-Type Skidder Machine Supplements Bulldozer C-Frame - Install
527 Track-Type Skidder Machine Supplements Bulldozer Lift Cylinder - Remove
527 Track-Type Skidder Machine Supplements Bulldozer Lift Cylinder - Install
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Three-Point Hitch Relief Valve