Sweeps - Remove and Install
Removal Procedure
Start By:
- Remove the muffler and the exhaust system. Refer to the Disassembly and Assembly Manual, SENR9418, "Muffler and Exhaust System - Remove and Install" for the correct procedure.
- Attach a lifting strap to sweep (2) and use a suitable lifting device to support the sweep. Remove cover bolt (4), cover (3), bolt (1), and the bushings.
Show/hide table
Illustration 1 | g00633418 |
- Remove bolt (5) and sweep (2). The weight of sweep (2) is approximately 24.5 kg (54 lb).
Show/hide table
Illustration 2 | g00633420 |
- Repeat Steps 1 and 480 for the other sweep.
Installation Procedure
- The weight of sweep (2) is approximately 24.5 kg (54 lb). Attach a lifting strap to sweep (2) and use a suitable lifting device to put the sweep in position for installation. Install bolt (5) .
Show/hide table
Illustration 3 | g00633420 |
- Install the bushing and bolt (1). Install cover (3) and cover bolt (4) .
Show/hide table
Illustration 4 | g00633418 |
- Repeat Steps 1 and 2 for the other sweep.
End By: Install the muffler and the exhaust system. Refer to the Disassembly and Assembly ManualSENR9418, "Muffler and Exhaust System - Remove and Install" for the correct procedure.
Caterpillar Information System:
527 Track-Type Skidder Machine Supplements Receiver-Dryer - Remove and Install
527 Track-Type Skidder Machine Supplements Refrigerant Evaporator Coil and Heater Core - Install
527 Track-Type Skidder Machine Supplements Refrigerant Evaporator Coil and Heater Core - Remove
527 Track-Type Skidder Machine Supplements Refrigerant Condenser Fans and Motor - Remove and Install
527 Track-Type Skidder Machine Supplements Refrigerant Condenser - Remove and Install
527 Track-Type Skidder Machine Supplements Refrigerant Compressor - Remove and Install
216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders Wheel Nuts - Tighten
527 Track-Type Skidder Machine Supplements Governor Control Linkage - Adjust
527 Track-Type Skidder Machine Supplements Governor Control Linkage and Decelerator - Assemble
824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Hydraulic System Piston Motor (Fan Drive)
793C Off-Highway Truck/Tractor Power Train Lockup Clutch and Synchronizing Valve - Assemble
527 Track-Type Skidder Machine Supplements Governor Control Linkage and Decelerator - Disassemble
527 Track-Type Skidder Machine Supplements Rollover Protective Structure (ROPS, Open Cab) - Remove and Install
527 Track-Type Skidder Machine Supplements Rollover Protective Structure (ROPS, Enclosed Cab) - Remove and Install
527 Track-Type Skidder Machine Supplements Cab - Remove
527 Track-Type Skidder Machine Supplements Cab - Install
527 Track-Type Skidder Machine Supplements Seat - Remove and Install
527 Track-Type Skidder Machine Supplements Bulldozer Blade (Power Angle and Tilt) - Remove and Install
527 Track-Type Skidder Machine Supplements Bulldozer Blade (Power Angle) - Remove and Install
527 Track-Type Skidder Machine Supplements Bulldozer Singletree - Remove and Install
527 Track-Type Skidder Machine Supplements Bulldozer C-Frame - Remove
527 Track-Type Skidder Machine Supplements Bulldozer C-Frame - Install
527 Track-Type Skidder Machine Supplements Bulldozer Lift Cylinder - Remove
527 Track-Type Skidder Machine Supplements Bulldozer Lift Cylinder - Install