216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders Caterpillar


Wheel Nuts - Tighten

Information for equipment:


POWER TRAIN
WHEEL GP

Wheel Nuts - Tighten 216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders
Tire Inflation - Check 216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders
Tire Segment - Replace - Removal 216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders
Regulatory Compliance Product Link - 121SR/321SR/420/421/ 522/523
Declaration of Conformity Product Link - 121SR/321SR/420/421/ 522/523

Evaluating the Conditions of Caterpillar Tires for Warranty Replacement{4203} Evaluating the Conditions of Caterpillar Tires for Warranty Replacement{4203}
Installation Guide for the Tire Monitoring System on Cat<SUP>&reg;</SUP> and Non-Cat Equipment {4203, 7490} Installation Guide for the Tire Monitoring System on Cat® and Non-Cat Equipment {4203, 7490}
Rim Inspection Guidelines {4202, 4209} Rim Inspection Guidelines {4202, 4209}

Tire and Rim 216, 226 and 228 Skid Steer Loaders Machine Systems
Tire and Rim 216, 226, 232 and 242 Skid Steer Loaders Machine Systems

149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551} 149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561} 226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731} 193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}

Tire and Rim - Remove and Install 216, 226 and 228 Skid Steer Loaders Powertrain

New Service Interval For Torque On New And Reinstalled Wheels {4208} 1999/10/18
Adding Weld Can Prevent Cracking of Rims {4202} 2006/04/03


Check the torque on new wheels or reinstalled wheels after every one service hour until the specified torque is maintained. After the specified torque is maintained, check the torque on the nuts after every ten service hours or every day.

Check the nuts on all four wheels. Use a star pattern when you are tightening the nuts.

The torque specifications are given in the following table.

Table 1
Tightening Torque for Wheels 
Airboss and Solid Tires  163 ± 7 N·m (120 ± 5 lb ft) 
Pneumatic Tires  149 ± 7 N·m (110 ± 5 lb ft) 
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.