3406E On-Highway Engine Caterpillar


Engine Oil Pressure Sensor - Remove and Install

Usage:

3406E 1MM

Removal Procedure


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.




    Illustration 1g00518159

  1. Disconnect harness assembly (2).

  2. Remove engine oil pressure sensor (1) from the cylinder block.

Installation Procedure


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.




    Illustration 2g00518159

  1. Install engine oil pressure sensor (1) and tighten to a torque of 10 ± 2 N·m (88 ± 18 lb in).

  2. Connect harness assembly (2).

Caterpillar Information System:

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.