Fan Drive - Install
Installation Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Position fan drive (4) on the front housing.
Show/hide table
Illustration 1 | g01029819 |
- Install bolts (2) and nuts (3) loosely.
- Install bolt (1) .
- Install the fan drive belts and adjust the belt tension. Refer to Specifications, "Belt Tension Chart".
Note: Install belts (5) as a set only.
- Tighten bolt (2) and nuts (3) that hold the fan drive in position.
Caterpillar Information System:
3406E On-Highway Engine Fan Drive - Remove
3406E On-Highway Engine Fan Drive - Assemble
3304B and 3306B Engines for Caterpillar Built Machines Water Temperature Regulator - Remove and Install
3406E On-Highway Engine Fan Drive - Disassemble
G3300 Engines Cylinder Pressure - Measure/Record
3524B Engines for Off-Highway Trucks Too Much Valve Lash
3176C Engine Cylinder Liner
3406E On-Highway Engine Housing (Front) - Install
3406E On-Highway Engine Housing (Front) - Remove
3304B and 3306B Engines for Caterpillar Built Machines Turbocharger - Assemble
3524B Engines for Off-Highway Trucks Too Much Vibration
C-12 Truck Engine Cylinder Liner
G3300 Engines Engine Air Cleaner Service Indicator - Inspect
3176C Engine Cooling System Coolant (DEAC) - Change
3406E Engine Speed/Timing Sensor - Remove and Install
3406C (PEEC III) Truck Engines Glossary of Electronic Control Terms
3406E On-Highway Engine Coolant Temperature Sensor - Remove and Install
3406E On-Highway Engine Engine Oil Pressure Sensor - Remove and Install
3500 Spark Ignited Engines Engine Design
318B Excavator Machine System Specifications Track Roller (Single Flange)
G3300 Engines Ignition System Spark Plugs - Inspect/Replace
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Engine Oil in Cooling System
G3500 Engines Camshaft
C-10 and C-12 Truck Engines Compression Brake