Fan Drive - Disassemble
Start By:
- Remove the fan drive. Refer to Disassembly and Assembly, "Fan Drive - Remove".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove bolts (8).
- Remove the fan adapter from pulley (5).
- Remove bolts (11) and retainer (10). Remove O-ring seal (7).
- Remove pulley (5) from shaft assembly (1).
- Remove bearing (9) and spacer (6) from pulley (5). Remove spacer (2), lip seal (3), and bearing (4) from pulley (5).
Show/hide table
Illustration 1 | g01029786 |
Caterpillar Information System:
G3300 Engines Cylinder Pressure - Measure/Record
3524B Engines for Off-Highway Trucks Too Much Valve Lash
3176C Engine Cylinder Liner
3406E On-Highway Engine Housing (Front) - Install
3406E On-Highway Engine Housing (Front) - Remove
3304B and 3306B Engines for Caterpillar Built Machines Turbocharger - Assemble
3524B Engines for Off-Highway Trucks Too Much Vibration
C-12 Truck Engine Cylinder Liner
3304B and 3306B Engines for Caterpillar Built Machines Turbocharger - Disassemble
3406E and 3456 Engines for Caterpillar Built Machines Rocker Arm and Shaft - Remove
3406E On-Highway Engine Rocker Arm and Shaft - Install
3406E On-Highway Engine Inlet and Exhaust Valve Springs - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines Water Temperature Regulator - Remove and Install
3406E On-Highway Engine Fan Drive - Assemble
3406E On-Highway Engine Fan Drive - Remove
3406E and 3456 Generator Set Engines Fan Drive - Install
G3300 Engines Engine Air Cleaner Service Indicator - Inspect
3176C Engine Cooling System Coolant (DEAC) - Change
3406E Engine Speed/Timing Sensor - Remove and Install
3406C (PEEC III) Truck Engines Glossary of Electronic Control Terms
3406E On-Highway Engine Coolant Temperature Sensor - Remove and Install
3406E On-Highway Engine Engine Oil Pressure Sensor - Remove and Install
3500 Spark Ignited Engines Engine Design
318B Excavator Machine System Specifications Track Roller (Single Flange)