Rocker Arm - Disassemble
Start By:
- Remove the rocker arms and the rocker shaft. Refer to Disassembly and Assembly, "Rocker Arm and Shaft - Remove".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove valve rocker arms (7) and unit injector rocker arm (2) from rocker shaft (3).
Note: Check the condition of all components. Replace any worn components or damaged components with new parts.
Note: Do not reuse the O-ring seals on the rocker arm adjustment screws if the buttons have been removed from the adjustment screws.
- Remove button (6) from adjuster screw (5) in valve rocker arm (7).
- Remove button (4) from adjuster screw (1) in unit injector rocker arm (2).
- Repeat Steps 1 through 3 for the remaining rocker arm assemblies.
Show/hide table
Illustration 1 | g01028860 |
Caterpillar Information System:
3306B Industrial Engine Turbocharger - Remove
3176C and 3196 Engines For Caterpillar Built Machines Crankshaft - Install
3176C and 3196 Engines For Caterpillar Built Machines Crankshaft - Remove
3176C and 3196 Engines For Caterpillar Built Machines Crankshaft Main Bearings - Install
3114, 3116, and 3126 Industrial and Generator Set Engines Fuel System - Prime
3176C and 3196 Engines For Caterpillar Built Machines Crankshaft Main Bearings - Remove
C-18 Truck Engines Compression Brake - Inspect/Adjust/Replace
3114, 3116, and 3126 Industrial and Generator Set Engines Engine Crankcase Breather - Clean
3406E On-Highway Engine Fuel Filter Base - Remove and Install
3176C and 3196 Engines For Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
3116 and 3126 Marine Engines Zinc Rods - Inspect/Replace
3406C (PEEC III) Truck Engines General Information
3306B Industrial Engine Turbocharger - Install
3406E On-Highway Engine Rocker Arm - Assemble
3176C and 3196 Industrial Engines Cylinder Head - Remove
3406C Engines for Caterpillar Built Machines Flywheel
3524B Engines for Off-Highway Trucks Excessive White Smoke
3406E On-Highway Engine Inlet and Exhaust Valve Springs - Remove and Install
3406E On-Highway Engine Rocker Arm and Shaft - Install
3406E and 3456 Engines for Caterpillar Built Machines Rocker Arm and Shaft - Remove
3304B and 3306B Engines for Caterpillar Built Machines Turbocharger - Disassemble
C-12 Truck Engine Cylinder Liner
3524B Engines for Off-Highway Trucks Too Much Vibration
3304B and 3306B Engines for Caterpillar Built Machines Turbocharger - Assemble