3612 and 3616 Engines Caterpillar


Manual Valve Group (Cylinder Pressure)

Usage:

3616 1PD



图 1g00288330

(1) 将 5P-3931 防咬合剂 涂在盖的螺纹上并拧紧至以下扭矩。 ... 17 ± 3 N·m (13 ± 2 lb ft)

(2) 将 5P-3931 防咬合剂 涂在杆的螺纹上并拧紧杆至以下扭矩。 ... 24 ± 3 N·m (18 ± 2 lb ft)

(3) 安装阀门时,确保从发动机侧面检查阀门时,阀门方向向右。 上紧到以下扭矩。 ... 73 ± 27 N·m (54 ± 20 lb ft)

如果以上所述的方向无法实现,则更换新阀门直至达到所需方向。 12 点钟方向是首选的位置。

组装时在气门的螺纹上涂抹 5P-3931 防粘结剂 。

注: 组装时如果需使用联轴节或适配器,安装前,先在螺纹上涂抹 5P-3931 防粘结剂 。

Caterpillar Information System:

3406E On-Highway Engine Engine Oil Pan - Remove and Install
3406E On-Highway Engine Gear Group (Front) - Remove
3176C and 3196 Engines For Caterpillar Built Machines Inlet Manifold - Install
3176C and 3196 Engines For Caterpillar Built Machines Inlet Manifold - Remove
3176C and 3196 Engines For Caterpillar Built Machines Water Outlet Manifold - Install
3176C and 3196 Engines For Caterpillar Built Machines Water Outlet Manifold - Remove
3406E and 3456 Engines for Caterpillar Built Machines Crankshaft Rear Seal - Install
3304B and 3306B Engines for Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install
3406E On-Highway Engine Crankshaft Rear Seal - Remove
3176C and 3196 Engines For Caterpillar Built Machines Lifter Group - Remove and Install
3306B Industrial Engine Tachometer Drive - Remove and Install
3176C and 3196 Engines For Caterpillar Built Machines Rocker Shaft and Pushrod - Install
3116 and 3126 Marine Engines Refill Capacities
G3300 Engines Engine Crankcase Breather - Clean
3116 and 3126 Marine Engines Reference Material
3612 and 3616 Engines Compression Release Valve
3176C and 3196 Engines for Caterpillar Built Machines Camshaft Bearings - Remove and Install
3406E On-Highway Engine Inlet and Exhaust Valve Seals - Remove and Install
G3300 Engines Ignition System Timing - Check/Adjust
3406E Truck Engine Vibration Damper
3176C and 3196 Engines For Caterpillar Built Machines Engine Oil Pan - Remove and Install
G3300 Engines Valve Data Sheet
3176C and 3196 Engines For Caterpillar Built Machines Cylinder Liner - Install
3176C and 3196 Engines For Caterpillar Built Machines Piston Cooling Jets - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.