Water Outlet Manifold - Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 5P-3413 | Pipe Sealant | 1 |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Inspect the condition of the gaskets. Replace the gaskets, if necessary.
- Install the gaskets and position water outlet manifold (2) and water temperature regulator housing (3) as a unit on the cylinder head.
- Install bolts (7) and the washers.
- Apply Tooling (A) to the threads of plugs (6). Install plugs (6).
- Position tube assembly (4) and install bolts (5) and the washers.
- Connect harness assembly (1).
- Fill the cooling system with coolant to the correct level. Refer to the Operation and Maintenance Manual for the correct filling procedure.
Show/hide table
Illustration 1 | g01062742 |
Show/hide table
Illustration 2 | g01062741 |
Caterpillar Information System:
3176C and 3196 Engines For Caterpillar Built Machines Water Outlet Manifold - Remove
3406E and 3456 Engines for Caterpillar Built Machines Crankshaft Rear Seal - Install
3304B and 3306B Engines for Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install
3406E On-Highway Engine Crankshaft Rear Seal - Remove
3176C and 3196 Engines For Caterpillar Built Machines Lifter Group - Remove and Install
3306B Industrial Engine Tachometer Drive - Remove and Install
3176C and 3196 Engines For Caterpillar Built Machines Rocker Shaft and Pushrod - Install
3406E On-Highway Engine Flywheel - Install
3176C and 3196 Engines For Caterpillar Built Machines Rocker Shaft and Pushrod - Remove
3176C and 3196 Engines For Caterpillar Built Machines Valve Mechanism Cover Base - Remove and Install
3306B Industrial Engine Service Meter - Remove and Install
3406E On-Highway Engine Flywheel - Remove
3176C and 3196 Engines For Caterpillar Built Machines Inlet Manifold - Remove
3176C and 3196 Engines For Caterpillar Built Machines Inlet Manifold - Install
3406E On-Highway Engine Gear Group (Front) - Remove
3406E On-Highway Engine Engine Oil Pan - Remove and Install
3612 and 3616 Engines Manual Valve Group (Cylinder Pressure)
3116 and 3126 Marine Engines Refill Capacities
G3300 Engines Engine Crankcase Breather - Clean
3116 and 3126 Marine Engines Reference Material
3612 and 3616 Engines Compression Release Valve
3176C and 3196 Engines for Caterpillar Built Machines Camshaft Bearings - Remove and Install
3406E On-Highway Engine Inlet and Exhaust Valve Seals - Remove and Install
G3300 Engines Ignition System Timing - Check/Adjust