Crankshaft Front Seal - Remove
拆卸步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 1U-7600 | 滑锤拉拔器 | 1 |
开始:
- 拆下减振器和皮带轮。 请参阅拆解和组装, "减振器和皮带轮 - 拆卸和安装"。
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
注: 必须同时更换曲轴前密封和承磨衬套。 一旦曲轴前密封与承磨衬套分开，就不得再次使用这些部件。
- 使用工具 (A) 或者冲头和锤子在承磨衬套 (2) 和曲轴前密封 (1) 上冲出不少于三个的孔。
Show/hide table
 | |
| 图 1 | g01042474 |
- 使用工具 (A) 拆下承磨衬套和曲轴前密封。
Caterpillar Information System:
3176C and 3196 Engines For Caterpillar Built Machines Crankshaft Front Seal - Install
3176C and 3196 Engines For Caterpillar Built Machines Crankshaft Front Seal - Remove
3176C and 3196 Engines For Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install
3606 and 3608 Engines Engine Design
3612 and 3616 Engines Fuel Injector Mechanism
3176C and 3196 Industrial Engines Water Outlet Manifold - Install
3176C and 3196 Industrial Engines Water Outlet Manifold - Remove
3406C Engines for Caterpillar Built Machines Connecting Rod - Connecting Rod For One-Piece Aluminum Piston
3406E, C-10 and C-12 Truck Engines Compression Brake - Inspect/Adjust
G3300 Engines Actuator Control Linkage - Lubricate
3116 and 3126 Marine Engines Engine Oil Level Gauge - Calibrate
3176C and 3196 Engines For Caterpillar Built Machines Crankshaft Rear Seal - Install
3176C and 3196 Engines For Caterpillar Built Machines Housing (Front) - Remove
G3500B Engines Product Description
3406C Engines for Caterpillar Built Machines Crankshaft
G3500B Engines Performance Parameters
3408E and 3412E Engines for Caterpillar Built Machines Connecting Rod Bearings - Remove
3304B and 3306B Engines for Caterpillar Built Machines Fuel Transfer Pump - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines Fuel Transfer Pump - Assemble
3176C and 3196 Industrial Engines Inlet Manifold - Remove
3406E On-Highway Engine Inlet and Exhaust Valve Seat Inserts - Remove and Install
3176C and 3196 Industrial Engines Inlet Manifold - Install
G3500B Engines Refill Capacities and Recommendations
3406E On-Highway Engine Engine Oil Filter Base - Disassemble