Flywheel - Install
Show/hide table
所需工具 | |||
工具 | 零件号 | 零件描述 | 数量 |
A | 138-7573 | 连杆支架 | 2 |
- 加热齿圈至最高温度
315°C599 (°F) 。 将齿圈安装在飞轮上。 放置齿圈,让零件号朝向曲轴。 让齿圈冷却。 使用软面锤来使齿圈坐落到飞轮的凸肩。Show/hide table图 1 g00513879 - 将工具 (A) 安装到飞轮上。 将适当的起吊设备固定到飞轮上。
- 将飞轮放在曲轴上的原始位置中。 对准飞轮和曲轴上的箭头。
- 将 7M-7456 固定胶涂抹在八个螺栓 (1) 的螺纹上。
- 安装八个螺栓 (1) 和垫圈。 均匀拧紧螺栓至扭矩为
300 ± 40 N·m (221 ± 30 lb ft) 。 - 检查飞轮跳动。 请参阅测试和调整, "基本区块"中的正确步骤。
Caterpillar Information System:
3406E On-Highway Engine Cylinder Head - Install
G3300 Engines Starting the Engine
3176C and 3196 Engines For Caterpillar Built Machines Flywheel - Remove
G3300 Engines Before Starting Engine
3406C Engines for Caterpillar Built Machines Service Meter
3176C and 3196 Engines For Caterpillar Built Machines Water Temperature Regulator - Remove and Install
3176C and 3196 Engines For Caterpillar Built Machines Water Pump - Install
3176C and 3196 Engines For Caterpillar Built Machines Water Pump - Remove
3176C and 3196 Engines For Caterpillar Built Machines Engine Oil Cooler - Install
3406E On-Highway Engine Cylinder Head - Remove
3406C (PEEC III) Truck Engine Alternator
3176C and 3196 Engines For Caterpillar Built Machines Engine Oil Cooler - Remove
3612 and 3616 Engines Fuel Injector - Heavy Fuel Oil
3176C and 3196 Engines For Caterpillar Built Machines Flywheel Housing - Remove and Install
3406E On-Highway Engine Vibration Damper and Pulley - Remove and Install
3406E On-Highway Engine Inlet and Exhaust Valve Guides - Remove and Install
3406E On-Highway Engine Inlet and Exhaust Valves - Remove and Install
C-18 Truck Engines Compression Brake - Inspect/Adjust
3176C and 3196 Engines For Caterpillar Built Machines Crankshaft Rear Seal - Remove
3176C and 3196 Engines For Caterpillar Built Machines Crankshaft Rear Seal - Install
3116 and 3126 Marine Engines Engine Oil Level Gauge - Calibrate
G3300 Engines Actuator Control Linkage - Lubricate
3406E, C-10 and C-12 Truck Engines Compression Brake - Inspect/Adjust
3406C Engines for Caterpillar Built Machines Connecting Rod - Connecting Rod For One-Piece Aluminum Piston