5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Caterpillar

LPS Menu Functions Summary

Usage:

793B 1HL

The following table is a summary of the VIMS/LPS supported functions. The keypad command is listed in the first column. The second column is a brief description.

Show/hide table

Table 1
Command	Description
"F1/Menu" "0"	Enter a new truck ID.
"F1/MENU" "1" "0"	Enter a new material.
"F1/MENU" "1" "1"	Enter a new load site.
"F1/MENU" "1" "2"	Enter a new blast number.
"F1/MENU " "1" "3"	Enter a new target truck weight.
"F1/MENU" "1" "4"	Enter a new truck counter value.
"F1/MENU" "1" "5"	Enter a new operator.
"F1/MENU" "1" " 6"	This command allows the operator to toggle the payload horn ON and OFF via the keypad.
"F1/MENU" "2"	“Reweighs the current bucket load. ”
"F1/MENU" "3"	“Selects the display mode of the message center. ”
"F1/MENU " "4"	View/print productivity report information
"F1/MENU" "5" "0"	“Executes a list viewer in order to check the calibration information.(Date,Time and etc.)”
"F1/MENU " "5" "1"	“Executes a mode to check the weigh range.”
"F1/MENU " "5" "2"	“Executes a mode to set the weigh range.”
"F1/MENU" "5" "3"	Enter a carryback weight.
"F1/MENU " "5" "4"	Enter a calibration weight.
"F1/MENU" "5" "5"	“Executes a calibration mode for a new or revised calibration.”
"F1/MENU" "5" "6"	Enter the bucket volume.
"F1/MENU" "6"	“Executes a sub-menu used to turn Loader Payload ON or OFF.”
"STORE"	“Permanently stores truck/cycle/delay information for download, later.”
"F3/DELAY"	“Allows the selection of a new loader delay code.”
"F2/CLEAR"	“Clears the last non stored bucket load from memory.”
"GAUGE"	“Sets the virtual gauge to view a VIMS parameters.”
"ID"	Enter an operator ID.