5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Caterpillar


CID 0341 FMI 05 Solenoid Valve (No. 4) (Warm Up) Current Below Normal - Test

Usage:

793B 1HL


Illustration 1g00507591
Schematic of the Warm Up Valve Solenoid

This diagnostic code is recorded when the VIMS module reads the electrical circuit for this solenoid and the circuit is open.

  1. CHECK FOR OPEN HARNESS

    1. Turn the key start switch and the disconnect switch to the OFF position.

    2. Disconnect the machine harness connector from the module.

    3. Measure the resistance from contact 33 of the solenoid circuit (wire E775-PK(Pink)) to the solenoid return (frame ground).

      Expected Results: The resistance is 30 to 65 ohms.

      Results:

      • OK - The resistance is 30 to 65 ohms. The resistance of the solenoid circuitry is correct. Inspect the contacts of harness connectors. Reconnect the harness connector to the module and check the message center for the same diagnostic code. If the diagnostic code is present, the interface module has failed. Replace the VIMS interface module. Refer to the Testing and Adjustment, "Module - Replace" section. STOP.

      • NOT OK - The resistance is NOT 30 to 65 ohms. The solenoid has failed or the circuitry of the solenoid harness has failed. Verify the machine harness. Repair the machine harness or replace the machine harness, if necessary. If the machine harness is not the cause of the diagnostic code then replace the solenoid. STOP.

Caterpillar Information System:

583R Pipelayer Power Train Transmission Hydraulic Control Valve - Install
784C and 785C Off-Highway Trucks Machine Systems Gear Pump (Hoist and Rear Brake Cooling) - Install
769D Off-Highway Truck and 771D Quarry Truck Torque Converter and Transmission Oil Level - Check
D250E Series II and D300E Series II Articulated Trucks 3306B Engine Supplement V-Belts - Remove and Install
980G Wheel Loader Machine Systems Vane Pump (Implement) - Disassemble
554 Forwarder and 574 Forwarder Safety Signs and Labels
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0341 FMI 03 Solenoid Valve (No. 4) (Warm Up) Voltage Above Normal - Test
583R Pipelayer Power Train Transmission Hydraulic Control Valve - Remove
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Service Brake Control Valve - Remove and Install
3306C Engines for Caterpillar Built Machines Crankshaft Pulley
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Steering Motor Case Drain Pressure Test
769D Off-Highway Truck and 771D Quarry Truck Breather (Torque Converter and Transmission) - Replace
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0341 FMI 06 Solenoid Valve (No. 4) (Warm Up) Current Above Normal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0341 FMI 11 Solenoid Valve (No. 4) (Warm Up) Failure Mode Not Identifiable - Test
554 Forwarder and 574 Forwarder Fire Extinguisher Location
784C and 785C Off-Highway Trucks Machine Systems Drive Shaft Guard - Remove and Install
784C and 785C Off-Highway Truck/Tractors Engine Starting
773D Off-Highway Truck and 775D Quarry Truck Gear Pump (Power Train)
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0371 FMI 03 Solenoid Valve (Air Horn) Voltage Above Normal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0371 FMI 05 Solenoid Valve (Air Horn) Current Below Normal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0371 FMI 06 Solenoid Valve (Air Horn) Current Above Normal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0371 FMI 11 Solenoid Valve (Air Horn) Failure Mode Not Identifiable - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0378 FMI 03 Solenoid Valve (Automatic Lubrication) Voltage Above Normal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0378 FMI 05 Solenoid Valve (Automatic Lubrication) Current Below Normal - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.