5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Caterpillar


CID 0824 FMI 06 Lamp (Green Payload) Current Above Normal - Test

Usage:

793B 1HL


Illustration 1g00730054
Schematic of the Payload Lamps

This diagnostic code is recorded when the VIMS module reads the current of the payload lamp and the current is above normal. The green payload lamp is ON CONTINUOUSLY whenever this failure is active.

  1. CHECK THE LAMP.

    1. At the green payload lamp, disconnect wire 636-GN(Green) from the green payload lamp socket.

      Expected Result: The diagnostic code CID 0824 FMI 06 is still active.

      Results:

      • OK - The diagnostic code is still active. The green payload lamp is not causing the failure. Proceed to 2.

      • NOT OK - The diagnostic code is NO longer active. The lamp or the lamp socket have failed. Replace the green payload lamp. For the purposes of this procedure, the correct resistance for a lamp is greater than 10 ohms. STOP.

  2. CHECK THE HARNESS.

    1. Turn the disconnect switch to the OFF position.

    2. Wire 636-GN(Green) remains disconnected from the green payload lamp.

    3. Disconnect the machine harness from the VIMS main module.

    4. At the machine harness connector for the VIMS main module, measure the resistance between contact 22 (wire 636-GN(Green)) and frame ground.

      Expected Result: The resistance is greater than 5000 ohms.

      Results:

      • OK - The resistance is greater than 5000 ohms. The harness resistance is correct. Proceed to 3.

      • NOT OK - The resistance is less than 5000 ohms. The harness has failed. Repair the machine harness or replace the machine harness. STOP.

  3. CHECK THE MODULE.

    1. Remove contact 22 from the machine harness connector for the VIMS module.

    2. Reconnect the harness connector to the VIMS module.

    3. Turn the disconnect switch and the key start switches to the ON position.

      Expected Result: The diagnostic code CID 0824 FMI 06 is still active.

      Results:

      • OK - The diagnostic code remains active. The VIMS main module has failed. Replace the VIMS main module. Refer to the Testing and Adjusting, "Module - Replace" section. STOP.

      • NOT OK - The diagnostic code is NO longer active. The VIMS main module is not causing the failure. The failure is intermittent. The probable cause is a poor electrical connection at the harness connectors or a damaged harness. Check the harness for damage. If necessary, clean the harness connectors. STOP.

Caterpillar Information System:

5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0824 FMI 05 Lamp (Green Payload) Current Below Normal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0824 FMI 03 Lamp (Green Payload) Voltage Above Normal - Test
Charging System Troubleshooting {1406} Charging System Troubleshooting {1406}
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Brake Accumulator - Remove
784C and 785C Off-Highway Trucks Machine Systems Traction Control Valve - Assemble
TK711, TK721, TK722 and TK732 Track Feller Bunchers Battery - Recycle
784C and 785C Off-Highway Trucks Machine Systems Hydraulic Tank (Torque Converter, Hoist, Brake, and Transmission) - Remove
Caterpillar Monitoring System Display Components
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Evaporator Coil - Remove and Install
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0271 FMI 03 Alarm (Action) Voltage Above Normal - Test
631E Series II Wheel Tractor-Scrapers Backup Alarm - Test
583R Pipelayer Power Train Transmission - Assemble
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Hydraulic System Piston Pump (Implement) - 550 Wheel Harvester
773D, 773E, 775D and 775E Off-Highway Trucks Machine Systems Hoist Cylinder - Disassemble
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0825 FMI 03 Lamp (Red Payload) Voltage Above Normal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0825 FMI 05 Lamp (Red Payload) Current Below Normal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0825 FMI 06 Lamp (Red Payload) Current Above Normal - Test
3406E On-Highway Engine Pistons and Connecting Rods - Disassemble
Caterpillar Monitoring System Gear Display Mode
583R Pipelayer Power Train Transmission and Bevel Gears - Install
3306C Engines for Caterpillar Built Machines Fan Drive
69D, 769D , 773D, 773E, 776D, 777D, 784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Braking System Sensors
784C and 785C Off-Highway Trucks Machine Systems Hydraulic Tank (Torque Converter, Hoist, Brake, and Transmission) - Install
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Hydraulic System Pressure Reducing Valve (Swing Motor Back Pressure)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.