IT14G Integrated Toolcarrier and 914G Wheel Loader Engine Supplement Caterpillar

Removal Procedure

Note: The hood is constructed of Dicyclopentadiene (DCPD). The material is strong and durable. Do not walk or stand on the hood. After the hood has been removed, do not stack any other items on top of the hood. This would have the potential of distorting the shape of the hood.

Show/hide table



Illustration 1	g00501483

1. Open the hood.

2. Disconnect connector (1) .

Show/hide table



Illustration 2	g00501484

3. Place a suitable lifting device through exhaust pipe on the hood.

Show/hide table



Illustration 3	g00501485

4. Attach a wooden board to a suitable lifting device, as shown. Apply slight tension to a suitable lifting device.

Show/hide table



Illustration 4	g00501486

5. Remove the nut and washer (2) from gas spring (3) .

6. Remove gas spring (3) away from clip (4) .

7. Repeat the same procedure for the other side of the machine.

Show/hide table



Illustration 5	g00501493

8. Remove four bolts and washers (5) that secure the hood.

9. Slowly raise the hood. Remove the hood away from the machine. Weight of the hood is 93 kg (205 lb).

Installation Procedure

Show/hide table



Illustration 6	g00501485

1. Align the hood into position. Weight of the hood is 93 kg (205 lb).

Show/hide table



Illustration 7	g00501493

2. Install four washers and bolts (5) that secure the hood.

Show/hide table



Illustration 8	g00501486

3. Install gas spring (3) to clip (4) .

4. Install the washer and nut (2) to gas spring (3) .

5. Repeat the same procedure for the other side of the machine.

Show/hide table



Illustration 9	g00501483

6. Connect connector (1) .

Show/hide table



Illustration 10	g00501485

Show/hide table



Illustration 11	g00501484

7. Remove a wooden board and a suitable lifting device from the hood.

8. Close the hood.