IT14G Integrated Toolcarrier and 914G Wheel Loader Engine Supplement Caterpillar

Removal Procedure

Start By:

1. Remove the hood. Refer to Disassembly and Assembly, "Hood - Remove and Install".

Show/hide table

Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin.

Show/hide table



Illustration 1	g00500549

1. Use two suitable lifting devices and a hoist to secure muffler (1) .

2. Install the muffler to the engine, as shown.

Show/hide table



Illustration 2	g00505843

3. Remove the bolt and washer (2) from the muffler.

4. Loosen nut (3) from the muffler.

Show/hide table



Illustration 3	g00505844

5. Remove two bolts and two washer (4) from the bracket.

6. Remove the muffler from the engine.

Installation Procedure

Show/hide table



Illustration 4	g00500549

1. Use two suitable lifting devices and a hoist to secure muffler (1) into position.

Show/hide table



Illustration 5	g00505844

2. Install washers and bolts (4) to the bracket.

Show/hide table



Illustration 6	g00505843

3. Tighten the washer and nut (3) to the muffler.

4. Install the washer and bolt (2) to the muffler.

5. Remove two suitable lifting devices and a hoist away from muffler (1) .

End By: Install the hood. Refer to Disassembly and Assembly, "Hood - Remove and Install".