Water Separator - Remove and Install
Removal Procedure
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in Caterpillar machines. Dispose of all fluids according to local regulations and mandates. |
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
- Open the engine hood.
- Loosen clamp (1) and remove hose (2) from water separator (3) .
Show/hide table
 | |
| Illustration 1 | g00498406 |
- Loosen clamp (5) and remove hose (6) from water separator (3) .
Show/hide table
 | |
| Illustration 2 | g00498411 |
- Remove two bolts and washers (4) .
- Remove water separator (3) from the machine.
Installation Procedure
- Install water separator (3) to the machine.
Show/hide table
| | |
| Illustration 3 | g00498411 |
- Install washers and two bolts (4) .
- Install hose (6) to water separator (3) and tighten clamp (5) .
- Install hose (2) to water separator (3) and tighten clamp (1) .
Show/hide table
| | |
| Illustration 4 | g00498406 |
Caterpillar Information System:
583R Pipelayer Machine Systems Implement Pump - Assemble
583R Pipelayer Machine Systems Hook Sheave Block (Upper) - Install
583R Pipelayer Machine Systems Boom Sheave Block (Lower) - Remove
583R Pipelayer Machine Systems Implement Pump - Disassemble
572R Pipelayer Power Train Track - Disassemble
980G Wheel Loader Power Train Relief Valve (Torque Converter Outlet) - Assemble
CB-434C, CB-534C and CB-634C Vibratory Compactors Water Spray System Water Tank (Rear)
IT14G Integrated Toolcarrier and 914G Wheel Loader Engine Supplement Electric Starting Motor - Remove and Install
583R Pipelayer Machine Systems Bottom Guard - Remove and Install
784C and 785C Off-Highway Trucks Machine Systems Relay Valve (Air Start) - Remove and Install
966F Series II Wheel Loader Power Train Output Transfer Gears - Disassemble
980G Wheel Loader Power Train Relief Valve (Torque Converter Outlet) - Disassemble
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0075 FMI 03 Temperature Sensor (Steering Oil) Voltage Above Normal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0075 FMI 04 Temperature Sensor (Steering Oil) Voltage Below Normal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0075 FMI 06 Temperature Sensor (Steering Oil) Current Above Normal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0096 FMI 03 Level Sensor (Fuel) Voltage Above Normal - Test
784C and 785C Off-Highway Trucks Machine Systems Air Dryer - Remove and Install
966G Wheel Loader and 972G Wheel Loader Engine Supplement Piston Motor (Hydraulic Fan) - Disassemble
784C, 785C and 785C HAA Off-Highway Truck/Tractors Power Train Position Sensor (Hoist Control)
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0096 FMI 04 Level Sensor (Fuel) Voltage Below Normal - Test
583R Pipelayer Machine Systems Cable - Remove and Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Engine Supplement Steering Frame Lock - Separate and Connect
769D Off-Highway Truck and 771D Quarry Truck Stopping the Engine
583R Pipelayer Machine Systems Winch Drive Motor - Remove