Piston Motor (Hydrostatic) - Install
Installation Procedure
Show/hide table
| REQUIRED TOOLS | |||
| Tool | Part Number | Part Description | Quantity |
| A | 1U-7505 | Jack Stand | 1 |
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in Caterpillar machines. Dispose of all fluids according to local regulations and mandates. |
- Place a suitable lifting device (A) under the piston motor.
Show/hide table
 | |
| Illustration 1 | g00480720 |
- Install the piston motor to the hydrostatic drive. Carefully lift the piston motor up to the original place. The weight of the piston motor is 60 kg (132 lb).
- Install four bolts (9) .
- Connect hydraulic hose on top of the piston motor (8) .
Show/hide table
 | |
| Illustration 2 | g00480643 |
- Connect three electrical connectors (7), (6) and (5) .
- Connect hydraulic hoses (4) and (3) .
Show/hide table
 | |
| Illustration 3 | g00480641 |
- Install hydraulic line (2) and (1) .
- Refill the hydraulic tank with oil. Refer to Operation and Maintenance Manual, SENR6868, "Lubricant Viscosities and Refill Capacities" for the correct capacity.
End By: Install the drive shaft. Refer to Disassembly and Assembly, "Drive Shaft - Remove and Install".
Caterpillar Information System:
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Piston Motor (Hydrostatic) - Assemble
D250E Series II and D300E Series II Articulated Trucks 3306B Engine Supplement Engine Rear Mount - Remove
784C and 785C Off-Highway Trucks Machine Systems Metering Pump (Steering) - Remove
583R Pipelayer Engine Supplement Engine and Torque Divider - Remove
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Pump Efficiency Check
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Piston Motor (Hydrostatic) - Disassemble
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Piston Motor (Hydrostatic) - Remove
583R Pipelayer Engine Supplement Radiator Guard and Radiator - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
3406E On-Highway Engine Engine Oil Cooler - Disassemble
784C and 785C Off-Highway Trucks Machine Systems Piston Pump (Steering) - Install
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Control Valve (Hoist) - Assemble
69D and 769D Off-Highway Truck and 771D Quarry Truck Air System and Brakes Inverter Valve (Secondary Brake)
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Parking Brake - Assemble
D7R Track-Type Tractor Power Train Sprocket Segment - Remove and Install
583R Pipelayer Power Train Track Roller - Disassemble
CB-434C, CB-534C and CB-634C Vibratory Compactors Water Spray System Water Tank (Front)
583R Pipelayer Engine Supplement Engine and Torque Divider - Install
797 Off-Highway Truck Power Train Transmission Planetary - Assemble
69D and 769D Off-Highway Truck and 771D Quarry Truck Air System and Brakes Air Control Valve (Retarder)
784C and 785C Off-Highway Trucks Machine Systems Metering Pump (Steering) - Install
784C and 785C Off-Highway Truck/Tractors Air System and Brakes Control Valve (Hoist)
583R Pipelayer Power Train Track Roller - Assemble
3306C Engines for Caterpillar Built Machines Cylinder Block