D5M Track-Type TractorPower Train Caterpillar

Installation Procedure

Show/hide table



Illustration 1	g00556902

1. Fasten a hoist and a suitable device to Tooling (C). Align the flat side of the roller shaft with the roller frame. Position track roller (2) .

2. Put caps (1) into position on each side of the roller and install bolts (3) .

3. Use Tooling (A) and lift the side of the tractor in order to remove Tooling (B). Lower the tractor to the ground with Tooling (A) .

4. Adjust the track tension.

   Note: Refer to the Operation And Maintenance Manual, SEBU7001 for the correct track adjustment.