Track Carrier Roller - Disassemble
Disassembly Procedure
Start By:
- Remove the track carrier rollers. Refer to Disassembly and Assembly, "Track Carrier Roller - Remove" for the machine that is being serviced.
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Remove plug (1) and drain the oil from the roller.
Show/hide table
Illustration 1 | g00556816 |
- Hold collar assembly (2) in place, and remove ring (3). Remove the collar assembly from the roller.
Show/hide table
Illustration 2 | g00556817 |
- Remove the Duo-Cone seal kit from the collar assembly.
- Remove O-ring seal (4) and Duo-Cone seal kit (5) from the roller.
Show/hide table
Illustration 3 | g00556819 |
- Install two 6 mm forged eyebolts in support assembly (7). Remove the support assembly from the roller. Remove O-ring seal (6) from the support assembly.
Show/hide table
Illustration 4 | g00556821 |
- Remove three bolts (9) and cover (8) from the roller.
Show/hide table
Illustration 5 | g00556822 |
- Bend the tabs of lock (10) away from the bolt head.
Show/hide table
Illustration 6 | g00556823 |
- Remove bolts (11), lock (10), and plate (12) .
- Use a press in order to remove shaft (14) from bearing cone (13) and the roller.
Show/hide table
Illustration 7 | g00556864 |
Show/hide table
NOTICE |
---|
In order to prevent damage to shaft (14), do not allow shaft (14) to fall when you remove the shaft from bearing (13) . |
- Remove bearing cone (13) from the roller.
- Remove bearing cone (15) from shaft (14) by using a press.
Show/hide table
Illustration 8 | g00556877 |
- If necessary, remove bearing cups (17) from roller (16) .
Show/hide table
Illustration 9 | g00556880 |
Caterpillar Information System:
D5M Track-Type TractorPower Train Track Carrier Roller - Assemble
D5M Track-Type TractorPower Train Track Adjuster - Remove and Install
D5M Track-Type TractorPower Train Track - Separate
D5M Track-Type TractorPower Train Track - Disassemble
D5M Track-Type TractorPower Train Track - Connect
D5M Track-Type TractorPower Train Track - Assemble
D5M Track-Type TractorPower Train Torque Converter Outlet Relief Valve - Remove
D5M Track-Type TractorPower Train Torque Converter Outlet Relief Valve - Install
D5M Track-Type TractorPower Train Torque Converter Outlet Relief Valve - Disassemble
D5M Track-Type TractorPower Train Torque Converter Outlet Relief Valve - Assemble
D5M Track-Type TractorPower Train Torque Converter - Remove
D5M Track-Type TractorPower Train Torque Converter - Install
D5M Track-Type TractorPower Train Track Carrier Roller - Install
D5M Track-Type TractorPower Train Track Carrier Roller - Remove
D5M Track-Type TractorPower Train Track Roller - Assemble
D5M Track-Type TractorPower Train Track Roller - Disassemble
D5M Track-Type TractorPower Train Track Roller - Install
D5M Track-Type TractorPower Train Track Roller - Remove
D5M Track-Type TractorPower Train Track Roller Frame - Install
D5M Track-Type TractorPower Train Track Roller Frame - Remove
D5M Track-Type TractorPower Train Transmission - Assemble
D5M Track-Type TractorPower Train Transmission - Disassemble
D5M Track-Type TractorPower Train Transmission Hydraulic Control Valve - Assemble
D5M Track-Type TractorPower Train Transmission Hydraulic Control Valve - Disassemble