D5M Track-Type TractorPower Train Caterpillar

Removal Procedure

Start By:

1. Remove the drive shaft. Refer to Disassembly and Assembly, "Main Drive Shaft - Remove and Install" for the machine that is being serviced.
2. Remove the power train oil pump. Refer to Disassembly and Assembly, "Power Train Oil Pump - Remove" for the machine that is being serviced.
3. Remove the implement pump. Refer to Disassembly and Assembly, SENR8491, "Implement Pump - Remove".

Note: Drain all fluids in a suitable container for storage or disposal.

Show/hide table



Illustration 1	g00559477

1. Remove hydraulic hose assembly (1) .

Show/hide table



Illustration 2	g00559481

2. Remove hose assembly (2) from the torque converter outlet relief valve.

3. Remove hose assembly (3) and (4) from the torque converter housing.

4. Disconnect wire harness (5) and remove the clip that secures the harness.

Show/hide table



Illustration 3	g00559488

5. Install a 12 mm lifting eye (6) and a hoist to the torque converter.

6. Remove bolts (7) that secure the torque converter to the flywheel housing.

7. Install two 10 mm forcing screws in the flange of the torque converter housing and tighten evenly.

8. Remove the torque converter from the flywheel housing and lower to the ground. The weight of the torque converter is 113 kg (250.0 lb).