545 Wheel Skidder Caterpillar


Fuel System Secondary Filter - Replace

Usage:

545 2FZ



Illustration 1g00480346

  • Open the engine access door on the right side of the machine.



      Illustration 2g00489380

    1. Remove the secondary fuel filter. Dispose of the used filter properly.

    1. Clean the filter mounting base. Make sure that all of the used seal is removed.

    1. Apply a light coat of clean fuel to the seal of the new filter.

    1. Install the new filter by hand. When the seal contacts the filter mounting base, tighten the filter by another 3/4 turn.

      Note: There are rotation index marks on the filter at 90 degree intervals. Use the rotation index marks as a guide for proper tightening.

    1. Prime the fuel system.

      Reference: Refer to Operation and Maintenance Manual, "Fuel System - Prime" for the correct procedure.

  • Caterpillar Information System:

    D6M Track-Type Tractor Machine Systems Battery - Remove and Install
    D6M Track-Type Tractor Machine Systems Air Conditioner and Heater Fan Motor - Remove and Install
    D6M Track-Type Tractor Machine Systems Air Conditioner Dryer - Remove and Install
    515 Wheel Skidder and 525 Wheel Skidder Steering Control
    637E Series II Wheel Tractor-Scrapers Cushion-Hitch Control
    515 Wheel Skidder and 525 Wheel Skidder Window Wiper and Washer Control
    623F Wheel Tractor-Scraper Power Train Transmission Electronic Control System
    D6R Track-Type Tractor Power Train Brake Control Valve
    D6F and D6G Track-Type Tractors Power Train General Information
    623F Wheel Tractor-Scraper 3406C Engine Supplement Oil Pan - Remove and Install
    631E Series II Wheel Tractor-Scrapers Steering Column Tilt Control
    3406C Engines for Caterpillar Built Machines Cylinder Head Valves
    D6M Track-Type Tractor Machine Systems Bulldozer (VPAT) - Install
    D6M Track-Type Tractor Machine Systems Bulldozer (VPAT) - Remove
    D6M Track-Type Tractor Machine Systems Bulldozer - Assemble
    D6M Track-Type Tractor Machine Systems Bulldozer - Disassemble
    D6M Track-Type Tractor Machine Systems Bulldozer - Install
    D6M Track-Type Tractor Machine Systems Bulldozer - Remove
    D6M Track-Type Tractor Machine Systems Bulldozer Angle Cylinder - Install
    D6M Track-Type Tractor Machine Systems Bulldozer Angle Cylinder - Remove
    D6M Track-Type Tractor Machine Systems Bulldozer C-Frame - Remove and Install
    D6M Track-Type Tractor Machine Systems Bulldozer Control Valve - Assemble
    D6M Track-Type Tractor Machine Systems Bulldozer Control Valve - Disassemble
    D6M Track-Type Tractor Machine Systems Bulldozer Control Valve - Install
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.