5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Caterpillar

This service program code allows the service technician to alter the reading of the machine odometer. The following list describes aspects of this service program code:

Security

1. This service program code will only function if the service tool ("VIMS-PC") is connected.

2. If the service tool ("VIMS-PC") becomes disconnected for 30 seconds or longer, this command will no longer be allowed to change the setting of the odometer .

The following message is shown on the message area after "ODO" (636) and "OK" are entered from the keypad.

Illustration 1	g00553642

The desired setting of the machine odometer can be entered from the keypad.

Illustration 2	g00553644

Press the "OK" key in order to accept the setting.

The following list contains the functions of the Input keys:

OK - This command accepts the setting of the machine odometer.

F2 - This command cancels the operation without changing the present setting.

Left Arrow - This command deletes the last character or characters that were entered.