This service program code starts or stops data logging (storage of data) until 30 minutes of information is stored. (If the data logger data is being downloaded from the machine, the data logger can not be started.) The data logger can be started and the data logger can stopped any number of times over any period of time (minutes, hours or days) until the “data logging” time totals 30 minutes and eight seconds. The dots of the data logger indicator are in the upper right hand corner of the universal gauge. The dots of the data logger indicator will stop scrolling when the data logger is no longer recording data. The dots of the data logger do not scroll when the service tool starts the data logger. The remaining storage time of the data logger is shown on the message area for five seconds after entering this SPC on the keypad. The format of the time is shown in "minutes:seconds". An example is shown here:
Illustration 1 | g00529116 |
The information that is shown in illustration 1 is displayed in the message area. The message area will display the remaining storage time prior to starting the data logger. When data logging is in operation a series of dots scroll in the upper right hand corner of the universal gauge.
Note: The dots in the upper right corner of the universal gauge scroll only if data logging is started from the keypad.