5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Caterpillar


Truck Payload - Calibrate

Usage:

793B 1HL
The following information describes the need for using the service program code: 729225 (PAYCAL)

Payload calibration is necessary when one or more of the following items are replaced: VIMS backup battery (“only if the disconnect switch is in the OPEN position”), VIMS main module, source software (“prior to 9.5X or later class of on board software”), configuration software (“prior to 9.5X or later class of on board software”), suspension cylinders and suspension cylinder pressure sensors.

Refer to the Systems Operation, "TPS Service Operation" section of this manual for the truck payload calibration procedure.

Caterpillar Information System:

5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Service Operations
24H Motor Grader Power Train Torque Converter Hydraulic System
793C Off-Highway Truck Machine Systems Front Suspension (Cylinder) - Disassemble
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Normal Operation
24H Motor Grader Braking System Accumulator Charging Valve
784C and 785C Off-Highway Truck/Tractors Power Train Brake Oil Overheating Troubleshooting
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Bank Valve - Remove
554 and 574 Forwarders Power Train Piston Motor (Power Train)
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Air Conditioner and Heater Fan Motor - Remove and Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Hydraulic Oil Cooler - Remove and Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Secondary Steering Valve - Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Secondary Steering Valve - Remove
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Brake Valve (Parking and Secondary) - Disassemble
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train Piston Pump (Power Train)
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Power Train Pressure Tests
24H Motor Grader Power Train Gear Pump (Transmission)
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Truck Payload - Configure
24H Motor Grader Power Train Oil Filter (Power Train)
D250E Series II, D300E Series II, D350E Series II and D400E Series II Articulated Trucks Power Train Electronic Control System CID 0722 FMI 06 Solenoid Valve (Secondary Brake) Current Above Normal - Test
24H Motor Grader Power Train Transmission
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train Travel Motor
D250E Series II, D300E Series II, D350E Series II and D400E Series II Articulated Trucks Power Train Electronic Control System CID 0724 FMI 03 Solenoid (Body Raise) Voltage Above Normal - Test
AP-1000B and BG-260C Asphalt Pavers Capacities (Refill)
D250E Series II, D300E Series II, D350E Series II and D400E Series II Articulated Trucks Power Train Electronic Control System CID 0724 FMI 05 Solenoid (Body Raise) Current Below Normal - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.