IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Caterpillar


Hydraulic Tank - Assemble

Usage:

IT14G 1WN

组装步骤

表 1
所需工具    
工具     零件号     零件描述     数量    
A     7M-7260     液体密封垫        



    图 1g00480799

  1. 安置密封垫和盖 (23) 。 安装螺栓 (22) 。

  1. 安装目测表(未显示)。



    图 2g00480798

  1. 安装滤清器 (21) 。



    图 3g00480797

  1. 将 O 形密封圈 (20) 安装在传感器 (19) 上。



    图 4g00480796

  1. 将传感器 (19) 安装到液压油箱内。



    图 5g00480795

  1. 将 O 形密封圈 (18) 安装到滤网 (17) 上。



    图 6g00480794



    图 7g01068004

  1. 安置滤网 (17) ,然后安装螺栓 (16) 。 连接线束组件 (17A) 。



    图 8g01058178

    ------ WARNING! ------

    弹簧压缩零件如果安装不当,会伤害人体。

    为避免伤害,遵照出版的装配程序,并穿上保护装备。


  1. 将 O 形密封圈 (14) 安装到螺塞 (15) 上。 将提升阀 (11) 、挡圈 (12) 、弹簧 (13) 和螺塞 (15) 安装到缸体 (5) 上。



    图 9g01058168

  1. 将提升阀 (9) 、挡圈 (10) 、O 形密封圈 (8) 和 O 形密封圈 (7) 安装到缸体 (5) 上。



    图 10g01058167



    图 11g00480785

    ------ WARNING! ------

    弹簧压缩零件如果安装不当,会伤害人体。

    为避免伤害,遵照出版的装配程序,并穿上保护装备。


  1. 将弹簧 (6) 安装到缸体 (5) 中。

  1. 将缸体 (5) 安置到板 (2) 上。 安装螺栓 (3) 。

  1. 将滤网 (4) 安装到板 (2) 上。



    图 12g00480782

  1. 将工具 (A) 涂抹到密封垫的两侧上。 将密封垫和板 (2) 安置到液压油箱上。 安装螺栓 (1) 。

End By: 安装液压油箱。 请参考 拆解和装配, "液压油箱 - 安装"。

Caterpillar Information System:

5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) General Information
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Hydraulic Tank - Disassemble
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Tire and Rim (Front) - Remove and Install
69D and 769D Off-Highway Trucks and 771D Quarry Truck Fan Drive - Disassemble
789C Off-Highway Truck/Tractor Pressure Sensor (Rear Axle Oil Pump)
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors Engine Air Filter Primary Element - Clean/Replace
G3B, K3A and L3A Denso Alternators Alternator - Assemble
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Hydraulic Tank - Install
517 Track-Type Skidder Hydraulic System Testing and Adjusting
789C Off-Highway Truck/Tractor Gear Pump (Transmission)
Electronic Modular Control Panel II (EMCP II) For MUI Engines Troubleshooting Undiagnosed Problems
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Three-Point Hitch Control Valve
938G Wheel Loader and IT38G Integrated Toolcarrier Tire Inflation - Check
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Cover (Cab Front) - Remove and Install
35, 45 and 55 Agricultural Tractors Rear Axle
35, 45 and 55 Agricultural Tractors Rear Axle
35, 45 and 55 Agricultural Tractors Center Housing
35, 45 and 55 Agricultural Tractors Parking Brake
35, 45 and 55 Agricultural Tractors Front Idler
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Cover (Cab Rear) - Remove and Install
69D and 769D Off-Highway Trucks and 771D Quarry Truck Fan Drive - Assemble
3512B and 3516B Engine Supplement for and 784C,, 785C and and 785C HAA Off-Highway Truck/Tractors Radiator - Install
561M Pipelayer Final Drive
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Tie Rod (Steering) - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.