IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Caterpillar

Installation Procedure

Show/hide table



Illustration 1	g00479630

1. Install tooling (A), a lifting strap and a hoist onto the hydraulic tank. Place the hydraulic tank into position in the machine.

Show/hide table



Illustration 2	g00479633

2. Install the washers and two bolts (32) that retain the sides of the hydraulic tank to the machine.

Show/hide table



Illustration 3	g00479632

3. Install clip (30), the washers and two bolts (29) that retain the bottom of the hydraulic tank. Install wiring assembly (31) .

Show/hide table



Illustration 4	g00479629

4. Install wiring assembly (28) .

Show/hide table



Illustration 5	g00479628

Note: Replace worn seals. Replace damaged seals.

5. Install hose assemblies (21), (24), (25), (26) and (27) .

6. Install tube assembly (22). Tighten nut (23) .

Show/hide table



Illustration 6	g00479627

7. Install tee fitting (19). Install tube assembly (17). Tighten nuts (18) and (20) .

Show/hide table



Illustration 7	g00479626

8. Install clips (16). Install hose assemblies (10) and (11). Install flange assemblies (13) and (15). Install bolts (12) and (14) .

9. Install hose assemblies (8) and (9) .

Show/hide table



Illustration 8	g00479625

10. Install clip (7). Install clamps (6), the washers and bolts (5) .

Show/hide table



Illustration 9	g00479624

11. Install hose (1) and clamp (2). Install tube assembly (4) and nut (3) .

12. Fill the hydraulic tank with hydraulic oil to the correct level. Refer to the Operation and Maintenance Manual for the correct fluid type and the correct fluid quantity.

End By:

1. Install the air cleaner. Refer to Disassembly and AssemblySENR6768-01, "Air Cleaner - Remove and Install".
2. Install the fuel tank. Refer to Disassembly and AssemblySENR6768-01, "Fuel Tank - Install".