Hydrostatic Drive Oil Level - Check
Show/hide table
Illustration 1 | g00475532 |
Allow the machine to cool before you check the hydrostatic drive oil level. Oil could spray when you remove the plug.
The hydrostatic drive box is located on the underside of the machine.
- Remove the oil level/fill plug slowly in order to release pressure. The oil should be level with the bottom of the plug threads.
Show/hide table
Illustration 2 | g00402618 |
- Add oil, if necessary. Refer to the Operation and Maintenance Manual, "Lubricant Specifications" and Operation and Maintenance Manual, "Refill Capacities".
- Clean the oil level/fill plug and install the oil level/fill plug.
Caterpillar Information System:
IT14G Integrated Toolcarrier Hydrostatic Drive Oil - Change
IT14G Integrated Toolcarrier Differential and Final Drive Oil Level - Check
IT14G Integrated Toolcarrier Differential and Final Drive Oil - Change
IT14G Integrated Toolcarrier Axle Oscillation Bearings - Lubricate
IT14G Integrated Toolcarrier Articulation Bearings - Lubricate
IT14G Integrated Toolcarrier Maintenance Parts
IT14G Integrated Toolcarrier Refill Capacities
IT14G Integrated Toolcarrier Towing the Machine
IT14G Integrated Toolcarrier Leaving the Machine
IT14G Integrated Toolcarrier Bulldozing and Dumping
D250E Series II and D300E Series II Articulated Trucks Engine Air Filter Service Indicator - Inspect
D250E Series II and D300E Series II Articulated Trucks Engine Air Filter Secondary Element - Replace
IT14G Integrated Toolcarrier Tire Inflation - Check
IT14G Integrated Toolcarrier Walk-Around Inspection
IT14G Integrated Toolcarrier Windows - Clean
IT14G Integrated Toolcarrier Single Lever Control
IT14G Integrated Toolcarrier Caterpillar Reference Material
572R Pipelayer Hydraulic System Load Sense Manifold
Electronic Modular Control Panel II (EMCP II) For MUI Engines Alarm Mode
G3B, K3A and L3A Denso Alternators Component - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines Shutdown Mode
Electronic Modular Control Panel II (EMCP II) For MUI Engines Service Mode
AP-1000B and BG-260C Asphalt Pavers Parking
Electronic Modular Control Panel II (EMCP II) For MUI Engines Fault Log Viewing OP1