IT14G Integrated Toolcarrier Caterpillar

Illustration 1	g00475532

Allow the machine to cool before you change the hydrostatic drive oil. Oil could spray when you remove the plug.

The hydrostatic drive box is located on the underside of the machine.

Show/hide table



Illustration 2	g00433956

1. Remove the oil level/fill plug (1) slowly in order to release pressure.

Show/hide table



Illustration 3	g00402578

2. Remove the drain plug (2) and allow the oil to drain into a suitable container.

3. Clean the drain plug and install the drain plug.

4. Add oil until the oil is level with the bottom of the plug threads. Refer to the Operation and Maintenance Manual, "Lubricant Specifications" and Operation and Maintenance Manual, "Refill Capacities".

5. Clean the oil level/fill plug and install the oil level/fill plug.