Differential and Final Drive Oil Level - Check
Models PDF1-1768, ; FWL1-950, and ; KZN1-Up, ; KNP1-213 and ; ERP1-213
Wipe the area around the dipstick/fill plugs for the differential and final drives before you remove the plugs.
Show/hide table
Illustration 1 | g00475408 |
Dipstick/Fill Plug for the Front Differential and Final Drive |
Show/hide table
Illustration 2 | g00393646 |
Dipstick/Fill Plug for the Rear Differential and Final Drive |
- Remove the dipstick/fill plug for the front differential and final drive in order to check the oil level.
- The oil level should be between the "ADD" mark and the "FULL" mark on the dipstick/fill plug. Add oil, if necessary.
- Clean the dipstick/fill plug and install the dipstick/fill plug for the front differential and final drive.
- Repeat step 1 to step 3 for the rear differential.
Models PDF1769-Up and ; FWL951-Up, ; KNP214-Up and ; ERP214-Up
Show/hide table
Illustration 3 | g02949640 |
(1) Front Differential Fill Plug
(2) Front Differential Drain Plug (3) Front Differential Level Check Plug |
Show/hide table
Illustration 4 | g02949656 |
(1) Rear Differential Fill Plug
(2) Rear Differential Drain Plug (3) Rear Differential Level Check Plug |
Show/hide table
Illustration 5 | g02949658 |
Planetary Final Drive Plug |
- Remove the front Differential Level Check Plug in order to check the oil level.
- Maintain the oil level at the bottom threads of the plug. Add oil, if necessary.
- Clean the plug and install the plug.
- Repeat step 1 to step 3 for the rear differential.
- Rotate the wheel so that the plug is at the side, horizontal with the center of the wheel. Remove the plug.
- Maintain the oil level at the bottom threads of the plug. Add oil, if necessary.
- Clean the plug and install the plug.
- Repeat step 5 to step 7 for each wheel.
Caterpillar Information System:
IT14G Integrated Toolcarrier Differential and Final Drive Oil - Change
IT14G Integrated Toolcarrier Axle Oscillation Bearings - Lubricate
IT14G Integrated Toolcarrier Articulation Bearings - Lubricate
IT14G Integrated Toolcarrier Maintenance Parts
IT14G Integrated Toolcarrier Refill Capacities
IT14G Integrated Toolcarrier Towing the Machine
IT14G Integrated Toolcarrier Leaving the Machine
IT14G Integrated Toolcarrier Bulldozing and Dumping
D250E Series II and D300E Series II Articulated Trucks Engine Air Filter Service Indicator - Inspect
D250E Series II and D300E Series II Articulated Trucks Engine Air Filter Secondary Element - Replace
D250E Series II and D300E Series II Articulated Trucks Engine Air Filter Primary Element - Clean/Replace
D250E Series II and D300E Series II Articulated Trucks 3306B Engine Supplement Electric Starting Motor - Remove and Install
IT14G Integrated Toolcarrier Hydrostatic Drive Oil - Change
IT14G Integrated Toolcarrier Hydrostatic Drive Oil Level - Check
IT14G Integrated Toolcarrier Tire Inflation - Check
IT14G Integrated Toolcarrier Walk-Around Inspection
IT14G Integrated Toolcarrier Windows - Clean
IT14G Integrated Toolcarrier Single Lever Control
IT14G Integrated Toolcarrier Caterpillar Reference Material
572R Pipelayer Hydraulic System Load Sense Manifold
Electronic Modular Control Panel II (EMCP II) For MUI Engines Alarm Mode
G3B, K3A and L3A Denso Alternators Component - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines Shutdown Mode
Electronic Modular Control Panel II (EMCP II) For MUI Engines Service Mode