 |
Failure to comply to the rated load can cause possible personal injury or attachment damage. Review the rated load of a particular attachment before performing any operation. Make adjustments to the rated load as necessary. |
 |
Note: Rated loads should be used as a guide. Attachments, uneven ground conditions, soft ground conditions, or poor ground conditions have effects on rated loads. The operator is responsible for being aware of these effects.
Rated loads are based upon a standard machine with the following conditions:
- lubricants
- full fuel tank
- enclosed ROPS
- 80 kg (176 lb ) operator
- 17.5 R 25 L2 or equivalent tires
Rated loads will vary with different attachments. Contact your Caterpillar dealer regarding the rated load for specific attachments.
The rated operating load is defined by the SAE standard "J818" (May 1987) and by the ISO 5998 ( 1986) as 50 % of the full turn static tipping load.
The corresponding dump clearance is given for each bucket at maximum lift height and at a 45 degree dump angle. The reach is given for each bucket at maximum lift height and at a 45 degree dump angle. Clearance is measured from the ground to the bucket edge in order to dump the load. The reach is measured from the front tire to the bucket edge.
 | |
| Illustration 1 | g00104485 |
Dimension (A) represents the dump clearance. Dimension (B) represents the reach. | |
The following chart provides the rated operating loads for the standard machine configuration with a bucket.
| RATED BUCKET LOAD | |||||
|---|---|---|---|---|---|
| Bucket Part Number | Ground Engaging Tools | Rated Volume | Rated Operating Load | Dump Clearance A |
Reach B |
| 112-3112 | Bolt-on Cutting Edge | 1.3 m3 (1.7 yd3) |
2365 kg (5214 lb) |
2922 mm (9 ft 7 inches) |
787 mm (2 ft 7 inches) |
| Teeth | 1.2 m3 (1.6 yd3) |
2409 kg (5311 lb) |
2840 mm (9 ft 3 inches) |
846 mm (2 ft 9 inches) |
|
| Teeth and Segments | 1.3 m3 (1.7 yd3) |
2345 kg (5170 lb) |
2841 mm (9 ft 3 inches) |
848 mm (2 ft 9 inches) |
|
| 112-3121 | Bolt-on Cutting Edge | 1.4 m3 (1.8 yd3) |
2343 kg (5165 lb) |
2886 mm (9 ft 6 inches) |
823 mm (2 ft 8 inches) |
| Teeth | 1.3 m3 (1.7 yd3) |
2388 kg (5264 lb) |
2805 mm (9 ft 2 inches) |
882 mm (2 ft 11 inches) |
|
| Teeth and Segments | 1.4 m3 (1.8 yd3) |
2324 kg (5123 lb) |
2806 mm (9 ft 2 inches) |
883 mm (2 ft 11 inches) |
|
| 112-3123 | Bolt-on Cutting Edge | 1.4 m3 (1.8 yd3) |
2247 kg (4953 lb) |
2907 mm (9 ft 6 inches) |
801 mm (2 ft 8 inches) |
| Teeth | 1.3 m3 (1.7 yd3) |
2341 kg (5161 lb) |
2826 mm (9 ft 3 inches) |
862 mm (2 ft 10 inches) |
|
| Teeth and Segments | 1.4 m3 (1.8 yd3) |
2278 kg (5022 lb) |
2827 mm (9 ft 3 inches) |
862 mm (2 ft 10 inches) |
|
| 112-3122 | Flush Mount Teeth | 1.3 m3 (1.7 yd3) |
2395 kg (5280 lb) |
2826 mm (9 ft 3 inches) |
900 mm (2 ft 11 inches) |
| 112-3129 | Flush Mount Teeth | 1.3 m3 (1.7 yd3) |
2349 kg (5178 lb) |
2847 mm (9 ft 3 inches) |
879 mm (2 ft 11 inches) |
| 128-1482 | Flush Mount Teeth | 1.4 m3 (1.8 yd3) |
2358 kg (5198 lb) |
2778 mm (9 ft 1 inch) |
937 mm (3 ft 1 inch) |