Water Pump - Assemble
组装步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件名称     | 数量     |
A     | 1P-0510     | 冲头总成     | 1     |
B     | 1P-1861     | 挡圈钳     | 1     |
C     | 135-7629     | 密封件安装工具     | 1     |
172-5711 | 密封件安装工具     | 1     |
135-7629 密封件安装工具 代替了 125-9622 密封件安装工具 和 2W-9102 密封件安装工具 。 新的 172-5711 密封件安装工具 用于安装 154-9291 水泵密封件 。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 使用工具 (A) 将唇式密封件 (4) 安装在水泵壳体 (14) 中。 密封件的密封唇必须朝向轴承。 将清洁的发动机机油涂覆在密封唇上。
Show/hide table
图 1 | g00509206 |
- 使用压力机将轴 (8) 安装到轴承 (5) 中。
- 将轴 (8) 和轴承 (5) 作为一个整体安装到水泵壳体 (14) 中。 使用工具 (B) 安装卡环 (6) 。
- 将水泵密封组件 (3) 安装到轴 (8) 上。 使用工具 (C) 将水泵密封组件压入到水泵壳体的孔中。
- 将叶轮 (13) 在轴 (8) 上放置到位,然后安装垫圈 (10) 和螺栓 (9) 。 将螺栓 (9) 拧紧至扭矩 47 ± 9 N·m (35 ± 7 lb ft)。
- 将密封垫 (2) 和盖 (1) 放置到位,然后安装两个垫圈和螺栓 (11) 。
- 使用压力机将轴承 (12) 安装到齿轮 (15) 上。
- 将齿轮 (15) 和轴承 (12) 作为一个整体放置在轴 (8) 上。 安装垫圈和螺栓 (7) 。 将螺栓 (7) 拧紧至扭矩 97 ± 7 N·m (72 ± 5 lb ft)。
End By: 安装水泵。 请参考 解体和组装, "水泵 - 安装"。
Caterpillar Information System:
3304B and 3306B Engines for Caterpillar Built Machines Water Pump - Disassemble
3306C Truck Engine Water Pump - Install
3306C Truck Engine Water Pump - Remove
3406E, C-10, C-12, C-15, C-16 Truck Engines Engine Oil and Filter - Change
3306C Truck Engine Water Temperature Regulator - Remove and Install
3306C Truck Engine Exhaust Manifold - Remove and Install
3406E, C-10 and C-12 Truck Engines Belt Tensioner - Inspect
G3612 and G3616 Engines Engine Design
3306C Truck Engine Turbocharger Wastegate - Remove and Install
G3612 and G3616 Engines Engine Design
3406E, C-10, C-12, C-15, C-16 Truck Engines Engine Oil Level Gauge - Calibrate - C-10 and C-12 Engines Only
3406E, C-10, C-12, C-15, C-16 Truck Engines Cylinder Head Grounding Stud - Inspect/Clean/Tighten
3408E and 3412E Engines for Caterpillar Built Machines Bearing Clearance - Check
3306B Industrial Engine Piston Cooling Jets - Remove and Install
3176C and 3196 Industrial Engines Belt Tensioner
3306C Truck Engine Crankshaft - Remove
3306C Truck Engine Crankshaft - Install
3176C and 3196 Engines for Caterpillar Built Machines Engine Oil Filter Base
G3612 and G3616 Engines Air Starting System
G3606 and G3608 Engines Lubrication System
Electronic Modular Control Panel II (EMCP II) for EUI Engines Component Location
Electronic Modular Control Panel II (EMCP II) for EUI Engines EMCP Electronic Control (Generator Set)
C-10 and C-12 Truck Engines Air Inlet and Exhaust System
3406E, C-10 and C-12 Truck Engines Electronic Unit Injector - Inspect/Adjust