953C Track-Type Loader Machine Systems Caterpillar


Refrigerant Condenser Fan and Fan Motor - Remove and Install

Usage:

953C 2ZN

Removal Procedure




    Illustration 1g00470853

  1. Remove bolts (1) and the washers. Remove cover (2) from the condenser.



    Illustration 2g00470854

  1. Remove bolts (3) and the washers from the clamp that holds the motor. Position the motor to the side.



    Illustration 3g00470855

  1. Disconnect positive wire (4) from the motor. Remove bolt (5) in order to disconnect the negative wire from the housing.

  1. Remove the fan, the motor and the clamp as a unit from the housing.

  1. Repeat Steps 2 through 4 for the opposite side.

Installation Procedure

  1. Install the fan, the motor, and the clamp as a unit into the housing.



    Illustration 4g00470855

  1. Connect positive wire (4) to the motor.

  1. Install bolt (5) in order to connect the negative wire to the housing.



    Illustration 5g00470854

  1. Install bolts (3) and the washers in the clamp that holds the motor.

  1. Repeat Steps 1 through 4 for the other side.



    Illustration 6g00470853

  1. Install cover (2) over the condenser. Install bolts (1) and the washers.

Caterpillar Information System:

3304B and 3306B Engines for Caterpillar Built Machines Engine Oil Cooler - Assemble
953C Track-Type Loader Machine Systems Refrigerant Condenser - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines Engine Oil Cooler - Disassemble
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Pilot Valve (Joystick)
D7R Track-Type Tractor Hydraulic System Main Relief Valve
615C Series II Wheel Tractor-Scraper Wheel Tractor Power Train Selector Valve (Torque Converter Lockup Clutch) - Disassemble
953C Track-Type Loader Machine Systems Refrigerant Compressor - Remove and Install
992G Wheel Loader Machine Systems Piston Pump (Fixed Displacement) - Assemble
992G Wheel Loader Machine Systems Piston Pump (Fixed Displacement) - Disassemble
D8R Track-Type Tractor Engine Air Filter Primary Element - Clean/Replace
953C Track-Type Loader Machine Systems Air Conditioner Belt - Remove and Install
631E Series II Wheel Tractor-Scrapers Auger Hydraulic System Oil Filter - Replace
3406E and 3456 Engines for Caterpillar Built Machines Basic Engine
953C Track-Type Loader Machine Systems Refrigerant Evaporator Coil - Remove
980G Wheel Loader Steering System Temperature Sensor (Hydraulic Oil)
3406E and 3456 Engines for Caterpillar Built Machines Cooling System
980G Wheel Loader Hydraulic System Piston Motor (Hydraulic Fan)
3406E and 3456 Engines for Caterpillar Built Machines General Information
3304B and 3306B Engines for Caterpillar Built Machines Compression Brake - Remove
953C Track-Type Loader Machine Systems Refrigerant Evaporator Coil - Install
G3B, K3A and L3A Denso Alternators Component Description
631E Series II Wheel Tractor-Scrapers Differential and Final Drive Oil Sample - Obtain
D8R Track-Type Tractor Engine Air Precleaner - Clean
3304B and 3306B Engines for Caterpillar Built Machines Compression Brake - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.