Blower Motor (Air Conditioner and Heater) - Remove and Install
Removal Procedure
Start By:
- Remove the seat. Refer to Disassembly and Assembly, "Seat - Remove and Install".
- Remove the seven screws in order to remove cover (1). Cover (1) is located behind the seat.
Show/hide table
Illustration 1 | g00470371 |
- Remove the ten bolts, the ten washers and cover (2) .
Show/hide table
Illustration 2 | g00470372 |
- Disconnect harness assembly (3) .
Show/hide table
Illustration 3 | g00470373 |
- Remove three nuts (4) and the three washers. Remove the blower fan and blower fan motor (5) .
Installation Procedure
- Position blower fan motor (5) and the blower fan. Install three nuts (4) and the three washers.
Show/hide table
Illustration 4 | g00470373 |
- Connect harness assembly (3) .
- Position cover (2) and install the ten washers and the ten bolts.
Show/hide table
Illustration 5 | g00470372 |
- Position cover (1) and install the seven screws.
Show/hide table
Illustration 6 | g00470371 |
End By: Install the seat. Refer to Disassembly and Assembly, "Seat - Remove and Install".
Caterpillar Information System:
Weld Repair Instructions for the Cab{7301} Weld Repair Instructions for the Cab{7301}
953C Track-Type Loader Machine Systems Bumper - Remove and Install
966F Series II Wheel Loader Power Train Limited Slip Differential - Assemble
980G Wheel Loader Braking System Gear Pump (Pilot and Braking)
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Filling and Flushing the Hydrostatic System - Test
G3B, K3A and L3A Denso Alternators Initial Troubleshooting Procedure
D9R Track-Type Tractor Hydraulic System Oil Level - Check
D11R Track-Type Tractor Electro/Hydraulic Oil Filter - Change
980G Wheel Loader Braking System Liquid Level Switch (Hydraulic Tank)
D8R Track-Type Tractor Engine Air Filter Secondary Element - Replace
D7R Track-Type Tractor Hydraulic System Bulldozer Tilt Cylinder
902 and 906 Compact Wheel Loaders Power Train System Hydrostatic System - Test and Adjust
615C Series II Wheel Tractor-Scraper Wheel Tractor Power Train Selector Valve (Torque Converter Lockup Clutch) - Remove
902 and 906 Compact Wheel Loaders Steering System Hydraulic Oil Contamination - Test
Critical Dimensions for Bucket Control Linkage {6107} Critical Dimensions for Bucket Control Linkage {6107}
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train General Testing and Adjusting Information
D7R Track-Type Tractor Hydraulic System Ripper Lift Cylinder
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train General Troubleshooting Information
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Hydrostatic System - Test and Adjust
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Machine Preparation for Troubleshooting
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Visual Inspection
980G Wheel Loader Hydraulic System Vane Pump (Implement and Hydraulic Fan)
631E Series II Wheel Tractor-Scrapers Auger Hydraulic System Oil Filter - Replace
953C Track-Type Loader Machine Systems Air Conditioner Belt - Remove and Install