Tilt Lever (Front) - Remove and Install
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A     | 132-8223     | 液压泵和马达总成     | 1     |
6V-3160 | 双作用油缸     | 1     | |
5P-4776 | 螺柱 1 in - 14     | 1     | |
9U-6833 | 螺母 1 in - 14     | 1     | |
3K-5234 | 硬垫圈     | 1     | |
1P-1831 | 接头     | 1     | |
5F-7693 | 隔套     | 1     | |
B     | 1P-0510     | 冲头总成     | 1     |
C     | 132-8223     | 液压泵和马达总成     | 1     |
6V-3160 | 双作用油缸     | 1     | |
5P-4776 | 螺柱 1 in - 14     | 1     | |
9U-6833 | 螺母 1 in - 14     | 1     | |
3K-5234 | 硬垫圈     | 1     | |
1P-1833 | 接头     | 1     | |
5F-7693 | 隔套     | 1     |
开始:
- 拆下倾斜连杆。 请参考拆解和装配, "倾斜连杆板 - 拆卸和安装"。
- 将木块放在倾斜油缸 (1) 和提升臂 (2) 之间。 将木块放在倾斜操纵杆和提升臂 (2) 之间,以防拆除零件过程中的意外移动。
Show/hide table
图 1 | g00454276 |
- 拆下螺栓 (3) 和销组件 (4) 。
Show/hide table
图 2 | g00468432 |
- 将适当的起吊设备连接到倾斜操纵杆上。
- 拆下螺栓 (6) 、销组件 (5) 和垫圈 (7) 。
Show/hide table
图 3 | g00468433 |
- 拆下倾斜操纵杆。 倾斜操纵杆的重量约为 25 kg (55 lb)。
- 拆下唇形密封 (8) 。
Show/hide table
图 4 | g00468436 |
- 使用工具 (C) 将轴承从倾斜操纵杆上拆下。
Show/hide table
图 5 | g00468438 |
Show/hide table
图 6 | g00468441 |
- 使用工具 (A) 、 (B) 和 (C) 拆下其他两个轴承。
安装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
D     | 5P-0960     | 含钼润滑脂     |     |
- 降低轴承的温度,以协助安装。
- 使用工具 (A) 和 (C) ,以将轴承安装到操纵杆端中。 确保轴承在孔内居中。
Show/hide table
图 7 | g00468440 |
Show/hide table
图 8 | g00468443 |
- 使用工具 (B) 将唇型密封 (8) 安装到轴承的各侧。
注: 安装过程中,确保密封唇指向倾斜操纵杆的外侧。
Show/hide table
图 9 | g00468436 |
- 将适当的起吊设备连接到倾斜操纵杆上。 安装倾斜操纵杆。 倾斜操纵杆的重量约为 25 kg (55 lb)。 安置倾斜操纵杆,以将倾斜操纵杆和连接器组件对准。
注: 组装前,确保销组件可在销孔中自由滑动。 使用工具 (D) 润滑所有的销孔和销组件。
Show/hide table
图 10 | g00468433 |
- 安装销组件 (5) 和垫圈 (7) 。 安装螺栓 (6) 。
- 安装销组件 (4) 。 安装螺栓 (3) 。
Show/hide table
图 11 | g00468432 |
- 将木块从倾斜油缸 (1) 和提升臂 (2) 上拆下。 将木块从倾斜操纵杆和提升臂 (2) 上拆下。
Show/hide table
图 12 | g00454276 |
End By: 安装倾斜连杆。 请参考 拆解和装配, "倾斜连杆板 - 拆卸和安装"。
Caterpillar Information System:
572R Pipelayer Hydraulic System Pressure Reducing Valve
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Lift Arms - Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Lift Arms - Remove
IT28G Integrated Toolcarrier Air Conditioner - Test
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Lift Cylinder - Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Lift Cylinder - Remove
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel System
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines General Information
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Tilt Lever (Front) and Tilt Link (Front) - Remove
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Tilt Cylinder - Install
65E, 75E, 85E and 95E Agricultural Tractors Brakes, Indicators and Gauges - Test
789C Off-Highway Truck Capacities (Refill)
793C Off-Highway Truck Machine Systems Cover (Cab Rear) - Remove and Install
3406E Truck Engine Fuel Filter (Primary)
3304B and 3306B Engines for Caterpillar Built Machines Fuel Filter Base - Remove and Install
572R Pipelayer Hydraulic System Counterweight Control Valve
IT28G Integrated Toolcarrier Battery - Inspect
793C Off-Highway Truck Machine Systems Window Wiper Motor - Remove and Install
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Propel System Pressure Control Valve - Shift Valve
IT28G Integrated Toolcarrier Battery, Battery Cable or Battery Disconnect Switch - Replace
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Air Inlet and Exhaust System
572R Pipelayer Hydraulic System Boom Kickout Valve
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Lubrication System
793C Off-Highway Truck Machine Systems Window Wiper Motor - Disassemble