Cylinder (Lift, Tilt and Steering) - Assemble
Assembly Procedure
Show/hide table
Tools Needed     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 1P-0510     | Driver Group     | 1     |
B     |     | Hydraulic Cylinder Repair Stand (1)     | 1     |
C     | 9U-7868     | Spanner Wrench     | 1     |
D     | 127-8069     | Adapter Plate     | 1     |
Show/hide table
( 1 ) | Refer to the tool guide, NEHC2004, "Hydraulic Cylinder Repair Stands". |
- Install the following items in head (8) : backup ring (11), O-ring seal (10), lip seal (15), retaining ring (16), U-cup seal (14), seal assembly (13) and wear ring (12) .
Note: Lubricate the sealing lips with clean hydraulic oil.
Show/hide table
Illustration 1 | g00280279 |
- Install seal assembly (5) and wear ring (6) on piston (7) .
- Position rod assembly (9) on Tool (B) .
- Install head (8) and piston (7) on rod assembly (9) .
- Install washer (4) and bolt (3) that holds piston (7) to rod assembly (9). The torque for bolt (3) is 1000 ± 100 N·m (740 ± 75 lb ft).
- Use Tool (B) to install cylinder body (2) on rod assembly (9) .
- Lubricate the threads on head (8) with 2P-2506 Thread Compound. Use Tooling (C) to install head (8) on cylinder body (2). The torque for head (8) is 475 + 270 - 000 N·m (350 + 200 - 000 lb ft).
End By: Install the cylinder. Refer to Disassembly and Assembly, "Tilt Cylinder - Install". Refer to Disassembly and Assembly, "Lift Cylinder - Install". Refer to Disassembly and Assembly, "Steering Cylinder - Install".
Caterpillar Information System:
65E, 75E, 85E and 95E Agricultural Tractors Fire Extinguisher - Inspect
D250E Series II and D300E Series II Articulated Trucks Braking System - Test
D250E Series II and D300E Series II Articulated Trucks Brake Pads - Check
D250E Series II and D300E Series II Articulated Trucks Body Pivot Bearings - Lubricate
D250E Series II and D300E Series II Articulated Trucks Battery Electrolyte Level - Check
D250E Series II and D300E Series II Articulated Trucks Backup Alarm - Test
3208 Marine Engine Crankshaft Vibration Damper - Inspect
65E, 75E, 85E and 95E Agricultural Tractors Engine Air Filter Secondary Element - Replace
65E, 75E, 85E and 95E Agricultural Tractors Engine Air Filter Primary Element - Clean
65E, 75E, 85E and 95E Agricultural Tractors Roading the Machine
793C Off-Highway Truck Machine Systems Transmission Electronic Control Module - Remove and Install
D250E Series II and D300E Series II Articulated Trucks Power Train Accumulator (Differential Lock) - Remove and Install
65E, 75E, 85E and 95E Agricultural Tractors Troubleshooting - Engine
784B and 785B Off-Highway Truck/Tractors Maintenance Interval Schedule
789B Off-Highway Truck Maintenance Interval Schedule
938G Wheel Loader and IT38G Integrated Toolcarrier Braking System Service Brake Control (Pedals) - Adjust
65E, 75E, 85E and 95E Agricultural Tractors Troubleshooting - Implement Hydraulic System
65E, 75E, 85E and 95E Agricultural Tractors Troubleshooting - Steering
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Diverter Valve (Ride Control)
D7R Track-Type Tractor Power Train Steering and Transmission Control
793C Off-Highway Truck Machine Systems Evaporator Coil - Remove and Install
793C Off-Highway Truck Machine Systems Blower Motor (Air Conditioner, Heater) - Remove
69D and 769D Off-Highway Trucks and 771D Quarry Truck Engine Oil Cooler - Remove
65E, 75E, 85E and 95E Agricultural Tractors Hydraulic Oil