Tilt Cylinder - Install
Installation Procedure
Show/hide table
Tools Needed     | |||
Tool     | Part Number     | Part Description     | Qty     |
B     | 1P-0510     | Driver Group     | 1     |
C     | 6V-9061     | Manual Pump Group     | 1     |
6V-3160 | Cylinder     | 1     | |
9S-5559 | Stud     | 1     | |
2J-3507 | Full Nut     | 1     | |
3K-5234 | Hard Washer     | 1     | |
1P-1831 | Bearing Puller Adapter     | 1     |
Note: Ensure that the pins slide freely in the pin bores before assembly. Lubricate all the pin bores and the pins with 5P-0960 Molybdenum Grease .
- Lower the temperature of bearing (10). Use tooling (C) in order to center bearing (10) in the bore. Use tooling (B) in order to install new lip type seals (10) .
Show/hide table
Illustration 1 | g00447304 |
- Install straps and a hoist to the tilt cylinder. Put the head end of the cylinder in the original location in the lifting arms. Install pin (9). Install the washer, the spacer and bolt (8) .
Show/hide table
Illustration 2 | g00446843 |
- Install plate (6). Install the washer and bolt (7) .
Show/hide table
Illustration 3 | g00446642 |
- Check the condition of the O-ring seals in the hose assemblies (5). Replace worn seals or damaged seals. Install hose assembly (5) to the tilt cylinder.
- Align the rod end of the tilt cylinder with the tilt lever. Install pin (4). Install the washer, the spacer and bolt (3) .
Show/hide table
Illustration 4 | g00446640 |
- Check the condition of the O-ring seals in the hose assemblies. Replace worn seals or damaged seals. Install hose assembly (2) and clamps (1) .
End By: Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Caterpillar Information System:
D250E Series II and D300E Series II Articulated Trucks Machine Systems Hydraulic Tank - Install
527 Track-Type Skidder Hydraulic System Grapple Control
527 Track-Type Skidder Hydraulic System Bulldozer Angle Control
527 Track-Type Skidder Hydraulic System Bulldozer Tilt Control
527 Track-Type Skidder Hydraulic System Bulldozer Lift Control
517 Track-Type Skidder Hydraulic System Arch Lift Cylinder
517 Track-Type Skidder Hydraulic System Bulldozer Angle Cylinder
517 Track-Type Skidder Hydraulic System Bulldozer Tilt Cylinder
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Hydraulic System Measuring Arm Cylinder
966G and 972G Wheel Loaders Power Train Differential Pinion - Assemble
517 Track-Type Skidder Hydraulic System Bulldozer Lift Cylinder
527 Track-Type Skidder Hydraulic System Inlet Manifold
517 Track-Type Skidder Hydraulic System Hydraulic Pump
D7R Track-Type Tractor Power Train Magnetic Screen
320B, 320B L and 320B N Excavators Battery or Battery Cable - Inspect/Replace
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Hydraulic System Saw Cylinder
793B Off-Highway Truck Seat
DASA 280 Measuring and Control System Diameter Sensor - Inspect
928G Wheel Loader Air Conditioner Condenser - Clean
D250E Series II and D300E Series II Articulated Trucks Machine Systems Hydraulic Tank - Remove
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Hydraulic System Holding Arm Cylinder
924Gz Wheel Loader Steering Column Tilt Control
Payload Control System General Information
527 Track-Type Skidder Hydraulic System Relief Valve for Arch Lift Cylinder