994D Wheel Loader Power Train Caterpillar


Filter Bypass Switch (Power Train)

Usage:

994D 3TZ



Illustration 1g00412121

Pressure differential that opens the bypass valve ... 345 ± 21 kPa (50 ± 3 psi)

(1) Torque for the two nuts ... 3.7 ± 0.3 N·m (32.75 ± 2.65 lb in)

(2) Lubricate the four O-rings with a minimal amount of the lubricant that is being sealed.

(3) Lubricate the O-ring with a minimal amount of the lubricant that is being sealed.

(4) 9X-8071 Spring

Length under test force ... 22.86 mm (.900 inch)
Test force ... 4.45 ± 0.50 N (1.000 ± .112 lb)
Free length after test ... 35.6 mm (1.40 inch)
Outside diameter ... 16.06 mm (.632 inch)

Caterpillar Information System:

992G Wheel Loader and 854G Wheel Dozer Power Train Reduced Rimpull Pressure - Test
992G Wheel Loader and 854G Wheel Dozer Power Train Torque Converter Impeller Clutch Pressure - Test
621F, 623F and 627F Wheel Tractor-Scrapers Air System and Brakes Differential Lock Control
992G Wheel Loader and 854G Wheel Dozer Power Train Torque Converter Lockup Clutch Pressure - Test
G3300 Engines Alternator - Inspect
637E Series II Wheel Tractor-Scrapers Engine Oil and Filter - Change
966G Wheel Loader and 972G Wheel Loader Machine Systems Steering Control Valve - Install
966G Wheel Loader and 972G Wheel Loader Machine Systems Steering Control Valve - Remove
627F Wheel Tractor-Scraper Engine Oil Level - Check
854G Wheel Dozer Machine Systems Steering Frame Lock - Separate and Connect
3508B Engine for Caterpillar Built Machines Fuel Filter Differential Pressure Switch
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Design
992G Wheel Loader and 854G Wheel Dozer Power Train Transmission Pressures - Test and Adjust
D6R Track-Type Tractor Power Train Transmission Mounting
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System Software Part Number Display - Submode 13
623F Wheel Tractor-Scraper Hydraulic System Bowl Circuit
633E Series II Wheel Tractor-Scraper Hydraulic System Check Valve (Carry)
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System Pressure Switch (Pilot) for the Hydraulic System - Check - Submode 25
992G Wheel Loader and 854G Wheel Dozer Power Train Solenoid Valve (Transmission Clutch) - Test
992G Wheel Loader and 854G Wheel Dozer Power Train Torque Converter Pump Drive - Adjust
D6R Track-Type Tractor Power Train Torque Divider
623E Wheel Tractor-Scraper Hydraulic System Check Valve (Floor)
613C Series II Wheel Tractor-Scraper Machine Systems Tire and Rim - Remove
613C Series II Wheel Tractor-Scraper Machine Systems Tire and Rim - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.