Water Temperature Regulator
Show/hide table
 | |
| Illustration 1 | g01416653 |
(1) Install the lip type seal into the water temperature regulator housing. Lubricate the sealing lip on the lip type seal with a small amount of antifreeze.
(A) Minimum stroke of the water temperature regulator at fully open temperature ... 10.4 mm (0.41 inch)
(2) Fully open temperature of the water temperature regulator ... 98 °C (208 °F)
Caterpillar Information System:
3176C and 3196 Industrial Engines Engine Oil Pan
3406E and 3456 Industrial Engines Gear Group (Rear)
3176C and 3196 Industrial Engines Engine Oil Pan
3406E and 3456 Industrial Engines Flywheel
3612 and 3616 Fast Vessel Engines Engine Operation
3500 and 3500B Engines Starting with Jump Start Cables
3176C and 3196 Engines for Caterpillar Built Machines Engine Oil Pressure
3500B Locomotive Engines Starting the Engine
C-10 and C-12 Truck Engines Camshaft
C-10 and C-12 Truck Engines Camshaft
3500B Locomotive Engines Cold Weather Starting
C-10 and C-12 Truck Engines Exhaust Manifold
3406E and 3456 Industrial Engines Alternator
3116 Truck Engines Belt Tensioner
C-10 and C-12 Truck Engines Belt Tensioner
C-10 and C-12 Industrial Engines Belt Tightener
3176C and 3196 Industrial Engines Coolant Conditioner Base
3406E and 3456 Industrial Engines Electric Starting Motor
3034 Engine for Caterpillar Built Machines Lubrication System
3176C and 3196 Industrial Engines Cylinder Block
3034 Engine for Caterpillar Built Machines Cooling System
3408C and 3412C Marine Engines Air Starting Motor
3406E and 3456 Industrial Engines Air Starting Motor Pressure Regulating Valve
3500B Locomotive Engines Electric Starting Motor