572R Pipelayer Caterpillar

Note: All safety information, warnings, and instructions must be read and understood before you perform any operation or any maintenance procedure.

Before each consecutive interval is performed, all of the maintenance requirements from the previous interval must also be performed.

When Required

Battery - Recycle
Battery, Battery Cable or Battery Disconnect Switch - Replace
Boom Line - Install
Circuit Breakers - Reset
Engine Air Filter Primary Element - Clean/Replace
Engine Air Filter Secondary Element - Replace
Engine Air Precleaner - Clean
Fuel System - Prime
Fuses - Replace
Hook Load Line - Install
Oil Filter - Inspect
Radiator Core - Clean
Radiator Pressure Cap - Clean/Replace

Every 10 Service Hours or Daily

Backup Alarm - Test
Boom Pivot Pins - Lubricate
Brakes, Indicators and Gauges - Test
Cooling System Level - Check
Counterweight Cylinder Bearings - Lubricate
Counterweight Hinge Pins - Lubricate
Engine Oil Level - Check
Fairlead Sheave - Lubricate
Fuel Tank Water and Sediment - Drain
Hydraulic System Oil Level - Check
Seat Belt - Inspect
Sheave Block Bearings - Lubricate
Transmission Oil Level - Check
Walk-Around Inspection

Every 50 Service Hours or Weekly

Pivot Shaft Oil Level - Check
Track Pins - Inspect

Initial 250 Service Hours

Transmission Oil Filter - Replace

Every 250 Service Hours

Engine Oil Sample - Obtain
Final Drive Oil Sample - Obtain
Hydraulic System Oil Sample - Obtain
Transmission Oil Sample - Obtain

Every 250 Service Hours or Monthly

Alternator and Fan Belts - Inspect/Adjust/Replace
Battery - Inspect
Braking System - Test
Cooling System Additive (DEAC) - Add
Engine Oil and Filter - Change
Final Drive Oil Level - Check
Track Adjustment - Adjust
Track Adjustment - Check

Every 500 Service Hours or 3 Months

Engine Crankcase Breather - Clean
Fuel System Primary Filter - Clean/Replace
Fuel System Secondary Filter - Replace
Fuel Tank Cap and Strainer - Clean
Hydraulic System Case Drain Filter - Replace
Hydraulic System Oil Filter - Replace
Recoil Spring Compartment Oil Level - Check
Transmission Oil Filter - Replace

Every 1000 Service Hours or 6 Months

Torque Converter Scavenge Screen - Clean
Transmission Magnetic Screen - Clean
Transmission Oil - Change
Transmission Scavenge Screen - Clean

Every 2000 Service Hours or 1 Year

Engine Valve Lash - Check
Engine Valve Rotators - Inspect
Final Drive Oil - Change
Hydraulic System Oil - Change
Track Roller Frame - Inspect
Track Roller Frame Guides - Inspect

Every 3000 Service Hours or 2 Years

Cooling System Coolant (DEAC) - Change
Cooling System Extended Life Coolant Extender - Add
Cooling System Water Temperature Regulator - Clean/Replace

Every 6000 Service Hours or 4 Years

Cooling System Extended Life Coolant - Change