Tool and Specification Chart for Inverted Duo-Cone Seals {0599, 7561}
- Caterpillar Products
- All
Introduction
Always use an installation tool that is the correct size in order to install the Duo-Cone Seals. Using the correct sized tool will prevent damage to the toric ring or to the sealing faces of the Duo-Cone Seals.
The installation tool serves two purposes:
- The tool locates the seal group to the correct distance from a reference surface.
- The tool positions the seal group around a shaft.
Reference: Special Instruction, SEHS8483, "Assembly and Installation of Inverted Duo-Cone Seals"
Inverted Duo-Cone Seal Tools and Dimensions
Note: Use isopropyl alcohol or other approved lubricants for assembly when you are installing Duo-Cone Seals.
Show/hide table
| Inverted Duo-Cone Seal Tools and Dimensions | ||||||||
|---|---|---|---|---|---|---|---|---|
| Seal Class | Toric Cross Section | Example Seal Groups | Installation Tool | Alignment Sleeve | Seal Ring | Assembled Height | ||
| Outside Diameter | Ramp Angle | Nominal | Tolerance | |||||
| E | |
|
15 degrees | |
|
|||
| |
|
12.5 degrees | |
|||||
| |
12.5 degrees | |
||||||
| |
12.5 degrees | |
||||||
| |
12.5 degrees | |
||||||
| |
12.5 degrees | |
||||||
| |
12.5 degrees | |
||||||
| |
12.5 degrees | |
||||||
| |
12.5 degrees | |
||||||
| |
12.5 degrees | |
||||||
| |
12.5 degrees | |
||||||
Caterpillar Information System:
C175-16 Locomotive Engines Before Starting Engine
3176C and 3196 Industrial Engines Exhaust Manifold
Assembly and Installation of Inverted Duo-Cone Seals{7561} Assembly and Installation of Inverted Duo-Cone Seals{7561}
3176C and 3196 Engines for Caterpillar Built Machines Cylinder Head
3176C and 3196 Industrial Engines Cylinder Head Valves
Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant System - Evacuate
Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant System - Charge
Air Conditioning and Heating R134a for All Caterpillar Machines Manifold Gauge Set (Refrigerant) - Install
Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant Recovery
3176C and 3196 Engines for Caterpillar Built Machines Electronic Unit Injector Mechanism
D6M Track-Type Tractor Characteristics of Diesel Fuel
Cat Commercial Diesel Engine Fluids Recommendations Fuel Information for Diesel Engines
3034 Engine for Caterpillar Built Machines Fuel System
C-10 and C-12 Truck Engines Exhaust Manifold
3500B Locomotive Engines Cold Weather Starting
C-10 and C-12 Truck Engines Camshaft
C-10 and C-12 Truck Engines Camshaft
3500B Locomotive Engines Starting the Engine
3176C and 3196 Engines for Caterpillar Built Machines Engine Oil Pressure
3500 and 3500B Engines Starting with Jump Start Cables
3612 and 3616 Fast Vessel Engines Engine Operation
3406E and 3456 Industrial Engines Flywheel
3176C and 3196 Industrial Engines Engine Oil Pan
3406E and 3456 Industrial Engines Gear Group (Rear)