1. Home
  2. Caterpillar
  3. Operation and Maintenance Manual
  4. #i00804857

IT14G Integrated Toolcarrier Caterpillar


Hydraulic System Oil Filter - Replace

Usage:

IT14G 1WN
Show/hide table

Illustration 1g00387726
Show/hide table

Illustration 2g00448380

  • The hydraulic oil filters are located on the left side of the engine compartment. Open the engine access door on the back side of the machine. Use the prop rod to hold the engine access door open.
      Show/hide table

      Illustration 3g00402418

    1. Remove the filter elements with a strap type wrench.

    1. Clean the filter element mounting base. Remove any part of the filter element gasket that remains on the filter element mounting base.

    1. Apply a light coat of oil to the gasket of the new filter element.

    1. Install the new filter element by hand. When the gasket contacts the filter element mounting base, tighten the filter element for an additional three quarters of a turn.
      Show/hide table

      Illustration 4g00402221

    1. Maintain the hydraulic oil level above the "ADD COLD" mark on the sight gauge. Add oil, if necessary.

    1. Inspect the gasket on the hydraulic tank filler cap for damage. Replace the gasket, if necessary.

    1. Install the hydraulic tank filler cap.

    1. Close the engine access door.

    • Caterpillar Information System:

    IT14G Integrated Toolcarrier Fuel Tank Cap - Clean
    IT14G Integrated Toolcarrier Fuel System Water Separator Element - Replace
    IT14G Integrated Toolcarrier Fuel System Water Separator - Drain
    IT14G Integrated Toolcarrier Fuel System Priming Pump - Operate
    IT14G Integrated Toolcarrier Fuel System Primary Filter - Replace
    914G Wheel Loader Equipment Lowering with Engine Stopped
    572R Pipelayer Battery Disconnect Switch
    Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Power Train Oil Distribution To Clutch
    IT14G Integrated Toolcarrier Engine Oil and Filter - Change
    793B Off-Highway Truck Power Train Torque Converter Lockup Clutch Signal Pressure - Test
    572R Pipelayer Horn
    IT14G Integrated Toolcarrier Engine Oil Level - Check
    IT14G Integrated Toolcarrier Hydraulic System Oil Level - Check
    572R Pipelayer Power Train Final Drive
    IT14G Integrated Toolcarrier Lubricant Viscosities
    572R Pipelayer Backup Alarm
    IT14G Integrated Toolcarrier Parking Brake Manual Release
    784B and 785B Off-Highway Truck/Tractors Truck Payload Measurement System (TPMS)
    C15 and C18 Petroleum Generator Sets Ether Starting Aid Cylinder - Replace - If Equipped
    789B Off-Highway Truck Truck Payload Measurement System (TPMS)
    789B Off-Highway Truck Hoist, Torque Converter and Brake Tank Suction Screen - Inspect, Clean and Replace
    IT14G Integrated Toolcarrier Radiator Core - Clean
    Challenger 65E, Challenger 75E, Challenger 85E and Challenger 95E Agricultural Tractors Air Conditioner Drain Line - Clean
    572R Pipelayer Seat Adjustment
    Back to top
    Contacts My AVS
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.