IT14G Integrated Toolcarrier Caterpillar


Engine Oil Level - Check

Usage:

IT14G 1WN


NOTICE

Do not overfill the crankcase. Engine damage can result.





    Illustration 1g00387726



    Illustration 2g00448380

  1. Open the engine access door on the back side of the machine. Use the prop rod to hold the engine access door open.



    Illustration 3g00395257

  1. While the engine is stopped, maintain the oil level in the crosshatched region of the engine oil dipstick (1) .



    Illustration 4g00395317

  1. If necessary, remove the oil filler plug (2) and add oil.

  1. Clean the oil filler plug and install the oil filler plug.

  1. Close the engine access door.

Caterpillar Information System:

IT14G Integrated Toolcarrier Engine Crankcase Breather - Clean
572R Pipelayer Light Switches
IT14G Integrated Toolcarrier Engine Air Filter Service Indicator - Inspect
3406E and 3456 Industrial Engines Exhaust Manifold
IT14G Integrated Toolcarrier Engine Air Filter Secondary Element - Replace
IT14G Integrated Toolcarrier Drive Shaft Universal Joints - Lubricate
793B Off-Highway Truck Power Train Torque Converter Lockup Clutch Leakage - Test
D250E Series II, D300E Series II, D350E Series II and D400E Series II Articulated Trucks Power Train Electronic Control System Switches
Challenger 65E, Challenger 75E, Challenger 85E and Challenger 95E Agricultural Tractors Air Conditioner Desiccant Receiver/Dryer - Replace
CP-563C and CS-563C Vibratory Compactors Crankshaft Vibration Damper - Inspect
793B Off-Highway Truck Power Train Torque Converter Lockup Clutch Pilot Pressure - Test and Adjust
IT14G Integrated Toolcarrier Cooling System Water Temperature Regulator - Clean/Replace
572R Pipelayer Horn
793B Off-Highway Truck Power Train Torque Converter Lockup Clutch Signal Pressure - Test
IT14G Integrated Toolcarrier Engine Oil and Filter - Change
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Power Train Oil Distribution To Clutch
572R Pipelayer Battery Disconnect Switch
914G Wheel Loader Equipment Lowering with Engine Stopped
IT14G Integrated Toolcarrier Fuel System Primary Filter - Replace
IT14G Integrated Toolcarrier Fuel System Priming Pump - Operate
IT14G Integrated Toolcarrier Fuel System Water Separator - Drain
IT14G Integrated Toolcarrier Fuel System Water Separator Element - Replace
IT14G Integrated Toolcarrier Fuel Tank Cap - Clean
IT14G Integrated Toolcarrier Hydraulic System Oil Filter - Replace
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.