Cooling System Level - Check
Show/hide table
Pressurized system: Hot coolant can cause serious burn. To open cap, stop engine, wait until radiator is cool. Then loosen cap slowly to relieve the pressure. |
Show/hide table
Illustration 1 | g00387726 |
Show/hide table
Illustration 2 | g00448380 |
Open the engine access door on the back side of the machine. Use the prop rod to hold the engine access door open.
- The radiator cap is located on the top of the radiator on the left side of the engine compartment. Remove the radiator cap slowly in order to relieve pressure.
Show/hide table
Illustration 3 | g00392877 |
- Maintain the coolant level between the "FULL" mark and the "ADD" mark on the coolant overflow reservoir. If you need to add coolant daily, check the cooling system for leaks.
Show/hide table
Illustration 4 | g00392879 |
- Inspect the radiator cap seal. Replace the radiator cap seal if the radiator cap seal is damaged.
- Install the radiator cap.
Caterpillar Information System:
3034 Engine for Caterpillar Built Machines Electric Starting Motor
572R Pipelayer Gauges
CP-563C and CS-563C Vibratory Compactors Cooling System Water Temperature Regulator - Replace
3406E and 3456 Industrial Engines Vibration Damper
IT14G Integrated Toolcarrier Circuit Breakers and Fuses - Reset/Replace
CP-563C and CS-563C Vibratory Compactors Cooling System Pressure Cap - Clean/Replace
IT14G Integrated Toolcarrier Cooling System Coolant Additive (DEAC) - Add
572R Pipelayer Power Train Bevel and Transfer Gears
IT14G Integrated Toolcarrier Cooling System Coolant (DEAC) - Change
CP-563C and CS-563C Vibratory Compactors Axle Oil Sample - Obtain
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Auxiliary Hydraulic System Steering Pump and Mounting
572R Pipelayer Power Train Transmission Mounting
789B Off-Highway Truck Power Train Torque Converter Lockup Clutch Supply Pressure - Test and Adjust
572R Pipelayer Digital Display Window
IT14G Integrated Toolcarrier Cooling System Water Temperature Regulator - Clean/Replace
793B Off-Highway Truck Power Train Torque Converter Lockup Clutch Pilot Pressure - Test and Adjust
CP-563C and CS-563C Vibratory Compactors Crankshaft Vibration Damper - Inspect
Challenger 65E, Challenger 75E, Challenger 85E and Challenger 95E Agricultural Tractors Air Conditioner Desiccant Receiver/Dryer - Replace
D250E Series II, D300E Series II, D350E Series II and D400E Series II Articulated Trucks Power Train Electronic Control System Switches
793B Off-Highway Truck Power Train Torque Converter Lockup Clutch Leakage - Test
IT14G Integrated Toolcarrier Drive Shaft Universal Joints - Lubricate
IT14G Integrated Toolcarrier Engine Air Filter Secondary Element - Replace
3406E and 3456 Industrial Engines Exhaust Manifold
IT14G Integrated Toolcarrier Engine Air Filter Service Indicator - Inspect