Battery, Battery Cable or Battery Disconnect Switch - Replace
- Open the engine access door on the back side of the machine. Use the prop rod to hold the engine access door open.
Show/hide table
Illustration 1 | g00387726 |
Show/hide table
Illustration 2 | g00448380 |
- If the machine is equipped with a battery disconnect switch, turn the switch to OFF (1). Remove the battery disconnect switch key.
Note: If the machine is not equipped with a battery disconnect switch, disconnect the negative battery cable from the frame. Then, continue with step 5.
Show/hide table
Illustration 3 | g00389326 |
- At the battery disconnect switch, disconnect the negative battery cable that is connected to the frame.
Show/hide table
NOTICE |
---|
Do not allow the disconnected battery cable to contact the disconnect switch. |
- Disconnect the negative battery cable at the battery.
Show/hide table
Illustration 4 | g00389632 |
- Perform the necessary repairs. Replace the cable or the batteries, as needed.
- Connect the negative battery cable at the battery.
- Connect the battery cable at the battery disconnect switch, if equipped. If the machine is not equipped with a battery disconnect switch, connect the negative cable to the frame.
- Install the battery disconnect switch key. Turn the battery disconnect switch to ON (2) .
Caterpillar Information System:
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Alternator and Regulator
572R Pipelayer Caterpillar Monitoring System
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Power Train Transmission
572R Pipelayer Ether Starting Aid - If Equipped
IT14G Integrated Toolcarrier Braking System - Test
IT14G Integrated Toolcarrier Brake Discs - Check
IT14G Integrated Toolcarrier Battery Electrolyte Level - Check
3408B and 3408C Industrial and Marine Engines Automatic Timing Advance Unit
IT14G Integrated Toolcarrier Battery - Inspect
914G Wheel Loader Axle Oscillation Bearings - Lubricate
793C Off-Highway Truck Machine Systems Piston Pump (Steering) - Disassemble
IT14G Integrated Toolcarrier Air Conditioner - Test
793B Off-Highway Truck Transmission Tank Suction Screen - Clean/Inspect/Replace
572R Pipelayer Power Train Drive Shaft
IT14G Integrated Toolcarrier Cab Air Filter - Clean/Replace
572R Pipelayer Power Train Transmission Mounting
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Auxiliary Hydraulic System Steering Pump and Mounting
CP-563C and CS-563C Vibratory Compactors Axle Oil Sample - Obtain
IT14G Integrated Toolcarrier Cooling System Coolant (DEAC) - Change
572R Pipelayer Power Train Bevel and Transfer Gears
IT14G Integrated Toolcarrier Cooling System Coolant Additive (DEAC) - Add
CP-563C and CS-563C Vibratory Compactors Cooling System Pressure Cap - Clean/Replace
IT14G Integrated Toolcarrier Circuit Breakers and Fuses - Reset/Replace
3406E and 3456 Industrial Engines Vibration Damper