Rubber Segment Track Operation - If Equipped
操作期間很容易損壞履帶組成件的橡膠部分。 僅可在橡膠履帶損壞較淺且損壞無害處的情況下,操作含有橡膠履帶的機器。 但是,任何有害損壞均可能對整個履帶組成件造成以下嚴重問題:
- 鐵芯過早磨損。
- 履帶履爪過早磨損。
- 鐵芯斷裂。
- 履帶履爪斷裂。
- 橡膠剝落。
- 鏈輪脫離。
應整體或部分更換此類故障的履帶組成件。 若要減少履帶更換次數,請遵守以下各項。 除了減少履帶更換次數以外,若要將履帶性能最大化,請遵守以下各項:
- 避免在拆遷或採石場等地行駛。
- 應避免在這些地點行駛,尤其是機器正在擺動的同時。
- 避免在鹽鹼條件下操作。
- 避免在崎嶇地形且過度負載的情況下,結合操作行駛與回轉。
- 避免在多岩石的工地操作。
- 機器在路面行駛時,請避免突然回轉機器。
- 請在
−25° 至 55°C (−13° 至 99°F) 範圍內使用橡膠履帶。 避免在高溫表面操作。 - 與標準履帶相比,橡膠履帶較不穩定。 應謹慎操作機器的左右運動。
- 如果鏈輪嚴重磨損,請使用新鏈輪進行更換。
- 確保橡膠履帶中無油質材料,如油、液壓機油、潤滑脂等。
Caterpillar Information System:
315B and 315B L Excavator Supplement For 3046 Engine Oil Pan - Remove and Install
315B Excavator Machine Systems Recoil Spring - Assemble
307B Excavator Implement Flow Control
307B Excavator Leaving the Machine
330B Excavator Hydraulic System Piston Pump (Main) - Test
315B Excavator Machine Systems Main Hydraulic Pump - Assemble
M312 Excavator Machine System Bucket - Ditch Cleaning, Adjustable
M312 Excavator Machine System Bucket - Ditch Cleaning, Rigid
345B Excavator Shipping Specifications
307B Excavator Implement Control Pedal - If Equipped
315B Excavator Machine Systems Recoil Spring - Disassemble
M312 Excavator Machine System Bucket
315B Excavator Machine Systems Pilot Valve (Travel) - Install
315B Excavator Machine Systems Final Drive Sprocket - Remove and Install
315B Excavator Machine Systems Pilot Valve (Travel) - Disassemble
M312 Excavator Machine System Bucket - Ditch Cleaning, Rigid
322B Excavator Hydraulic System Swing Motor - Test - Measurement of Case Drain Oil
315B Excavator Machine Systems Pilot Valve (Travel) - Assemble
322B Excavator Hydraulic System Travel Motor - Test - Measurement of Case Drain Oil
315B and 315B L Excavator Supplement For 3046 Engine Governor Control Motor - Remove and Install
322B Excavator Hydraulic System Pump Control (Negative Flow) - Adjust
M312 Excavator Machine System Bucket Linkage
315B Excavator Machine Systems Solenoid Valve (Swing Priority) - Remove and Install
315B and 315B L Excavator Supplement For 3046 Engine Flywheel and Ring Gear - Remove and Install