315B and 315B L Excavator Supplement For 3046 Engine Caterpillar


Oil Pan - Remove and Install

Usage:

315B 1SW

Removal Procedure


NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in Caterpillar machines.

Dispose of all fluids according to local regulations and mandates.


  1. Drain the oil from the engine into a suitable container for storage or disposal. The capacity of the engine oil with filter is 13.5 L (3.5 US gal).

  1. Remove the engine oil level gauge. Refer to Disassembly and Assembly, "Engine Oil Level Gauge - Remove and Install" in this manual.



    Illustration 1g00370598

    This view is under the machine.

  1. Disconnect electrical connector (1) .

  1. Remove 30 bolts (2) and the 30 washers.

  1. Remove oil pan (3) .

Installation Procedure

  1. Make sure that all mating surfaces of the oil pan and the engine block are thoroughly clean. Use a new gasket for the installation.



    Illustration 2g00370598

    This view is under the machine.

  1. Position the new gasket and oil pan (3) on the engine block.

  1. Install the 30 washers and 30 bolts (2). Tighten the 30 bolts to a torque of 10 to 13 N·m (7 to 10 lb ft).

  1. Connect electrical connector (1) .

  1. Install the engine oil level gauge. Refer to Disassembly and Assembly, "Engine Oil Level Gauge - Remove and Install" in this manual.

  1. Fill the engine with oil to the correct level. Refer to Operation and Maintenance Manual for the correct procedure.

Caterpillar Information System:

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.