416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System Caterpillar


Tilt Cylinder

Usage:

426C 1CR

123-5091 Tilt Cylinder Parallel Lift Machines




Illustration 1g00302588

(1) Lubricate the threads. Tighten the bolt to the following torque. ... 900 ± 100 N·m (660 ± 75 lb ft)

(2) Inside diameter of a new cylinder ... 76.20 ± 0.08 mm (3.000 ± 0.003 inches)

(3) Outside diameter of a new rod ... 50.75 ± 0.038 mm (1.998 ± 0.0015 inch)

(4) Inside diameter of a new head ... 51.13 ± 0.03 mm (2.013 ± 0.0012 inch)

(5) Lubricate the threads. Tighten the head to the following torque. ... 600 ± 130 N·m (440 ± 95 lb ft)

107-0625 Tilt Cylinder Single Tilt ( 416C Machines)




Illustration 2g00302605

(1) Lubricate the threads. Tighten the bolt to the following torque. ... 1050 ± 150 N·m (775± 110 lb ft)

(2) Lubricate the seal lips with a small amount of the lubricant that is being sealed.

(3) Inside diameter of a new cylinder ... 82.59 ± 0.09 mm (3.252 ± 0.004 inch)

(4) Outside diameter of a new rod ... 50.750 ± 0.038 mm (1.998 ± 0.0015 inches)

(5) Inside diameter of a new head ... 47.9 ± 0.03 mm (1.89 ± 0.001 inch)

(6) Lubricate the threads. Tighten the head to the following torque. ... 600 ± 130 N·m (440 ± 95 lb ft)

107-4346 Tilt Cylinder Single Tilt ( 426C, 428C, 436C and 438C Machines)




Illustration 3g00302607

(1) Lubricate the threads. Tighten the bolt to the following torque. ... 1050 ± 150 N·m (775 ± 110 lb ft)

(2) Lubricate the seal lips with a small amount of the lubricant that is being sealed.

(3) Inside diameter of a new cylinder ... 88.9 ± 0.08 mm (3.50 ± 0.003 inch)

(4) Outside diameter of a new rod ... 50.750 ± 0.038 mm (1.998 ± 0.0015 inches)

(5) Inside diameter of a new head ... 51.08 ± 0.03 mm (2.011 ± 0.001 inch)

(6) Lubricate the threads. Tighten the head to the following torque. ... 600 ± 130 N·m (440 ± 95 lb ft)

Caterpillar Information System:

784B and 785B Off-Highway Truck Hydraulic System General Information
768C, 769C, 769D, 772B, 773B, 773D, 776C, 777B, 777D, 784B, 785, 785B, 789, 789B, 793, 793B and 793C Off-Highway Truck/Tractors and 771C, 771D and 775D Quarry Trucks Automatic Retarder Control (ARC) System Pressure Switch (Accelerator)
768C, 769C, 769D, 772B, 773B, 773D, 776C, 777B, 777D, 784B, 785, 785B, 789, 789B, 793, 793B and 793C Off-Highway Truck/Tractors and 771C, 771D and 775D Quarry Trucks Automatic Retarder Control (ARC) System Speed Sensor (Engine)
Caterpillar Monitoring System Component Description
572R Pipelayer Steering Clutch and Brake
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System Lift Cylinder
583R Pipelayer Power Train Priority Valve
Caterpillar Monitoring System General Information
Caterpillar Monitoring System Calibration Mode
IT14G Integrated Toolcarrier Secondary Steering
IT14G Integrated Toolcarrier Parking Brake
784C and 785C Off-Highway Truck/Tractors Steering System Visual Inspection
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train Axle Housing - Disassemble
793B Off-Highway Truck Radiator Core - Clean
784B and 785B Off-Highway Truck Hydraulic System General Information
VFS50 and VFS70 Versatile Flotation System Rear Idler Support Pin - Replace
3054 Engine Engine Oil Relief Valve
3054 Engine Fuel Transfer Pump
3054 Engine Fuel Injection Nozzles
3054 Engine Fan Drive
3054 Engine Engine Oil Filter Base
789B Off-Highway Truck Steering System Solenoid and Relief Valve (Steering)
3054 Engine Muffler
938G Wheel Loader and IT38G Integrated Toolcarrier Hydraulic System Solenoid Valve (Ride Control)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.