768C, 769C, 769D, 772B, 773B, 773D, 776C, 777B, 777D, 784B, 785, 785B, 789, 789B, 793, 793B and 793C Off-Highway Truck/Tractors and 771C, 771D and 775D Quarry Trucks Automatic Retarder Control (ARC) System Caterpillar


Speed Sensor (Engine)

Usage:

769C 01X



Illustration 1g00831283

(1) Torque for locknut ... 25 ± 5 N·m (18 ± 4 lb ft)

Resistance at 25 °C (77 °F) ... 142 Ohms

Air gap ... 0.89 mm (0.035 inch)

Screw the speed sensor into the hole by hand until the end of the sensor barely contacts the gear tooth. Then, back out the sensor by a 1/2 turn (180 degrees in the counterclockwise direction).

Caterpillar Information System:

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.